< >

Incoloy 800 Nickel Base Alloy Plate

Incoloy800 is an alloy containing typically 15-25% Cr, 30-45% nickel, and small amounts of aluminum and titanium. Introduction800 alloys typically contain 15-25% Cr, 30-45% nickel, and small amounts of aluminum and titanium.

Contact Now

Product Details

Excellent stress corrosion rupture resistance in chloride, low concentration of NaOH aqueous solution and high temperature and high pressure water, so it is used to manufacture stress corrosion rupture resistant equipment

Type	Nickel Alloy Sheet/Plate
Thickness	0.8-36mm
Length	3000mm, 5800mm, 6000mm,etc
Width	1000mm,1500mm,2000mm,etc
Standard	ASTM,AISI,JIS,DIN,EN
Application	Construction,Ship,Boiler,Machinery,etc
Certification	ISO,SGS,TUV
Technique	Cold Rolled/Hot Rolled
Edge	Mill Edge/ Silt Edge
Grade	Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etc
	Inconel 600/601/602CA/617/625/713/718/738/X-750;ETC
	Incoloy: Incoloy 800/800H/800HT/825/925/926;etc
	GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etc
	Monel: Monel 400/K500/R405,etc
	Nitronic 40/50/60/75/80A/90/A263 ;etc
Specification	Wire: 0.01-10mm /Strip: 0.055.0-5.0250mm /Bar: φ4-50mm;Length 2000-5000mm /Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm /Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
Cutting Type	Laser cutting;water-jet cutting;flame cutting
Protection	1. Inter paper available2. PVC protecting film available
Application	Costruction Industry/Kichten Products/Fabrication Industry/Home Decoration