Duplex Stainless Steel Pipe s31803

Alloy S31803 and Alloy S32205 Stainless Steel is used most often in heat exchangers, marine construction, oil and gas industry, chemical processing.

 

Alloy S31803 and S32205 stainless steel is a dual-phase stainless steel whose grain structure is ferritic and austenitic, hence the name “duplex”. With twice the mechanical strength and corrosion resistance of common austenitics, alloy S31803 and S32205 stainless steel offers some advantages over 316L and 317L:

·         Lower coefficient of thermal expansion and a higher thermal conductivity

·         Resists chloride stress corrosion cracking

·         Pitting and crevice corrosion resistance

·         Excellent choice for high chloride environments

·         Lower cost than high alloyed austenitic

Excellent general corrosion resistance; superior to Grade 316 steel in most environments. Excellent resistance to localized corrosion including inter granular, pitting and crevice corrosion; the CPT of 2205 is generally at least 35ºC. The grade is also resistant to chloride stress corrosion cracking (SCC) at temperatures of up to about 150ºC. Grade 2205 will often perform well in environments which cause premature failure of austenitic grades. It has better resistance to sea water then Grade 316.


  Contact Now
Product Details

s31803 Duplex stainless steel is a kind of  Medium alloy stainless steel,it's PREN value is 32-33, and its corrosion resistance is between AISI 316L and 6%Mo+N austenitic stainless steel.

Duplex stainless steel has the characteristics of both austenitic stainless steel and ferritic stainless steel because it has austenite + ferrite dual-phase structure, and the content of the two phase structures is basically the same. The yield strength can reach 400Mpa ~ 550MPa, which is twice that of ordinary austenitic stainless steel. Compared with ferritic stainless steel, duplex stainless steel has high toughness, low brittle transition temperature, significantly improved intergranular corrosion resistance and welding performance; at the same time, it retains some characteristics of ferritic stainless steel, such as 475 ℃ brittleness, heat High conductivity, small coefficient of linear expansion, superplasticity and magnetic properties. Compared with austenitic stainless steel, the strength of duplex stainless steel is high, especially the yield strength is significantly improved, and the pitting corrosion resistance, stress corrosion resistance, corrosion fatigue resistance and other properties are also significantly improved.  

Due to its special advantages, duplex stainless steel is widely used in petrochemical equipment, seawater and wastewater treatment equipment, oil and gas pipelines, papermaking machinery and other industrial fields. development prospects.                                   

pipe65155.jpg

Product Name

s31803/304/304L/316/316L/321/309S/310S Bright Annealed Stainless Steel Pipe 

Thickness

0.1-200mm SCH5S - XXS

Length

1000mm -15000mm,etc/ Customized as your requirement

Diameter

10.3 mm (1/8")  -  2032mm (80")

Standard

ASTM,JIS, AISI, GB, DIN, EN

Surface

BA,2B,NO.1,NO.4,4K, HL,8K

Certification

ISO, SGS

Technique

Cold Rolled, Hot Rolled

Edge

Mill Edge, Slit Edge
QualitySGS Inspection MTC
Testing MethodsFlaw detection, Water pressure testing, Eddy current testing, Hydrostatic testing or Ultrasonic examination and also with chemical and physical property inspection
Grade (ASTM UNS)

201,304,304L,321,316,316L,317L,347H,309S,310S,904L,

S32205,2507,254SMOS,32760,253MA,N08926,etc
Trade termsFOB, CIF and CFR

Payment Terms

FOB 30%T/T,70% before shipment
CIF 30% pre-payment and the balance to be paid upon B/L (copy)
or Irrevocable 100% L/C at sight

20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)   24-26CBM

40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)   54CBM

40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High)    68CBM


Product  inspection  certificate

zhengshu-54.jpg

Product Line

Factory Display.jpg


Packaging:


To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be

 provided. in bundle,plastic bags, thin film,wooden pallet,standard seaworthy export packing or as customer demands

baozhuang6686.jpg

FAQ:

1.Q: Are you a trading company or a manufacturer?

   A: we are manufacturer,We have our own factory, located in Shandong,welcome to contact us!


2.Q: What is the quality of your products? 

   A: We have high quality and best products, our products get some good feedback from customers around the world.  Once you get our product, there are some issues in guarantee, we will provide help in the first place.


3.Q: Do you have ready stock?

   A: Yes, we have large ready stock can meet your urgent request.


4.Q: Which countries do you export to?

   A:So many, like Iran, Bangladesh, Indonesia, Philippines, Argentina, Nepal... 


After-Sales Service:


1.Technical Support by phone Whatsapp or email around the clock 

2.Problems will be dealt with as soon as possible according to the situation



Product form