< >

ER316/316L stainless steels

Product information about the stainless steel tig wire

1. Diameter: 0.60--4.0mm
2. Length: 100cm/piece
3. Packing: 5kg/10kg/box
4. Type: Er308L, Er316L, Er309L
5. Delivery time: 20-25 days
6. Surface: Matt, bright polished

Features:
1. Good performance in corrosion resistance makes welding quality higher.
2. Good coil-forming ability
4. High elasticity and high fatigue resistance
5. Strong corrosion resistance against exposure to the toughest atmosphere

Contact Now

Product Details

ER316/316L is used for welding types 316 and 316L stainless steels. It has a maximum carbon content of .03% to reduce the possibility of formation of intergranular carbide precipitation. This low carbon alloy is not as strong as 316H at elevated temperatures.

Typical Applications: primarily used for welding low carbon molybdenum bearing austenitic alloys

AWS Class: ER316/316L	Certification: AWS A5.9/A5.9M:2006
Alloy: ER316/316L	AWS/ASME SFA A5.9

Welding Position: F, V, OH, H

Current:

MIG-DCEP

TIG-DCEN

Tensile Strength, ksi:	80*
Yield Strength, ksi:	55*
Elongation %:	40*

*AWS Requirement, Not Specified

Typical Wire Chemistry as per AWS A5.9 (single values are maximum)

C	Cr	Ni	Mo	Mn	Si	P	S	Cu
0.03	18.0-20.0	11.0-14.0	2.0-3.0	1.0-2.5	0.30-0.65	0.03	0.03	0.75

Typical Welding Parameters
Diameter		Process	Volt	Amps	Shielding Gas
in	(mm)	Process	Volt	Amps	Shielding Gas
.035	(0.9)	GMAW	22-23	180-210	Spray transfer 98% Argon/2% Oxygen
.045	(1.2)	GMAW	23-25	195-260	Spray transfer 98% Argon/2% Oxygen
1/16	(1.6)	GMAW	25-28	260-390	Spray transfer 98% Argon/2% Oxygen
.035	(0.9)	GMAW	19-23	55-170	Short Circuiting Transfer 90% Helium/ 7 ½% Argon / 2 ½% CO2
.045	(1.2)	GMAW	19-23	100-185	Short Circuiting Transfer 90% Helium/ 7 ½% Argon / 2 ½% CO2
.035	(0.9)	GTAW	13-16	70-120	100% Argon
.045	(1.14)	GTAW	13-16	70-120	100% Argon
1/16	(1.6)	GTAW	14-18	90-130	100% Argon
3/32	(2.4)	GTAW	15-20	120-175	100% Argon
1/8	(3.2)	GTAW	15-20	150-220	100% Argon