Español
العربية
Русский
Français
1. Comparison of copper pipe and stainless steel pipeNow from the material's physical performance, health performance, corrosion resistance, economic value and other aspects of comparison.1. Comparison of physical propertiesComparison of tensile strength:Take the commonly used 304 material of thin-…
2022/11/04 16:09
Stainless steel 304, 316 difference：First, 316 stainless steel containing Mo, corrosion resistance is better than 304 stainless steel in a high temperature environment, so in a high temperature environment, engineers will generally choose 316 material parts.Second, there are also differences…
2022/11/03 11:30
1 stainless steel Angle is widely used, is in the construction of the layout, and a variety of engineering layout, such as the construction of the beam, etc., in the construction of engineering equipment has a significant effect.2 stainless steel Angle steel in use, has a comparative weldability,…
2022/11/01 14:43
Stainless steel is divided into martensitic stainless steel, ferritic stainless steel, duplex stainless steel, austenitic stainless steel, precipitation hardening stainless steel. 1, martensitic stainless steel: through heat treatment can adjust the mechanical properties of stainless steel, is a…
2022/10/31 16:33
400 series stainless steel is an alloy of iron, carbon and chromium. Because it does not contain nickel, it is a nickel stainless steel, also known as stainless iron. The 400 series stainless steel has normal magnetic properties due to its martensitic structure and iron element.400 series stainless…
2022/10/29 13:48
Why doesn't stainless steel rustBecause of the addition of 12.5% chromium in stainless steel composition, it can make stainless steel surface generated a layer of passivation film, prevent the metal matrix is destroyed, enhance corrosion resistance, so the surface will not rust. But stainless steel…
2022/10/27 16:21
The utility of stainless steel flux cored wire is particularly MAG welding, MAG welding has the subsequent characteristics1) Compared with manual welding, welding speed can be advanced 2-4 times, its welding efficiency is as much as 90%(stainless steel electrode only 55%)2) to the current, voltage…
2022/10/20 10:34
1, Corrosion resistance, non-flammable, non-toxic and tasteless. 2, Good wear resistance, long service life, stainless steel perforated mesh wear resistance for ordinary sieve plate 3 to 5 times, for ordinary rubber sieve plate more than 5 times. 3, The total cost is low, although the same…
2022/10/13 15:24
304 stainless-steel is a common stainless-steel material, density of 7.93 g/cm³, the enterprise is likewise referred to as 18/8 stainless-steel. High temperature resistance of 800℃, with good processing performance, excessive toughness, extensively utilized in industry and furnishings ornament…
2022/10/13 15:14
1, structural steel. In the production, we generally use structural steel and welding structural steel two kinds, they are mainly used in Bridges, vehicles, steel structural parts, ships and other types of production and production. 2, weather resistance steel. Weather-resistant steels are…
2022/09/29 14:52
Differences between 410 stainless steel and 304 stainless steel410 stainless steel and 304 stainless steel are common stainless steel grades, which are different in composition, performance, use, etc.304 stainless steel contains more metal element nickel (Ni) than 410. It has better corrosion…
2022/09/20 14:25
Basic introduction about Duranickel and Ni-Mo、Ni-Mo-Cr HastelloyDuranickel:The nickel content of these alloys exceeds 94%. The ultrahigh nickel alloy containing 4.75% manganese is resistant to vulcanization at high temperatures. If heat treatment is carried out, Duranickel 301 will become stronger…
2022/09/19 13:36
Submitted successfully
We will contact you as soon as possible
Close