Español
العربية
Русский
Français
E316-16
2022/04/24 11:54
| AWS Chemical Composition Requirements | |
| C = 0.08 max | Si = 0.90 max |
| Cr = 17.0 – 20.0 | P = 0.04 max |
| Ni = 11.0 – 14.0 | S = 0.03 max |
| Mo = 2.0 – 3.0 | Mn = 0.5-2.5 |
| Cu = 0.75 max | |
Application
E316-16 electrodes are designed for the welding to type 316 chromium-nickel steel. This alloy contains 2% to 3% molybdenum is addition to sufficient chromium and nickel to render is austenitic. Molybdenum is added to increase the corrosion resistance of the alloy to a firm attack know as pitting, which is induced by such corrosive metals as sulfuric and sulfurous acids, sulfites, chloride and cellulose solutions.
| Deposited Chemical Composition % (Typical) | ||
| C = 0.055 | Cr = 18.85 | Si = 0.56 |
| Ni = 12.90 | Mn = 1.70 | P = 0.025 |
| S = 0.024 | Mo = 2.35 | |
| Deposited All Weld Metal Properties % | |
| (Typical) As-Welded | |
| Yield Strength | 87,000 psi |
| Tensile Strength | 58,000 psi |
| Elongation | 36% |
Deposited Charpy-V-Notch Impact Properties %
Not Applicable
| Available Sizes & Recommended Welding Parameters | |||
| Diameter | Voltage | Flat | Amperage Vertical & Overhead |
| 3/32 | 24-28 | 70-85 | 65-75 |
| 1/8 | 26-30 | 85-110 | 80-90 |
| 5/32 | 28-32 | 110-140 | 100-120 |
| 3/16 | 28-32 | 120-160 | 110-130 |
