Brief introduction of A002 (E308L-16) extra fine electrode

Description: A002 is an ultra-low carbon Cr19Ni10 stainless steel electrode with titanium calcium type coating.

The carbon content of the metallization is less than 0.04%, which has good resistance to intergranular corrosion, and can be used for both AC and DC.

Have good operating process performance.

Uses: For welding ultra-low carbon Cr1Ni10 stainless steel structures, also for 0G19N

The working temperature of i11Ti is lower than 3000C with corrosion-resistant stainless steel lining structure. Mainly used for synthetic fibers

Manufacture of dimensional, fertilizer, petroleum and other equipment

Chemical composition of deposited metal

Precautions when welding:

1. The electrode must be baked at about 1500C for 1h before welding.

2. Use DC power as much as possible, because when AC welding is used, the melting depth is shallow. The current should not be over

large to avoid redness of the electrode

3. The corrosion resistance test of the deposited metal and the ferrite content are determined by the agreement between the supplier and the buyer.

Xinyuan stainless steel products, trustworthy, if you have any needs, welcome to inquire with me.