Español
العربية
Русский
Français
Introduction:Alloys comparable to Incoloy 825 alloys are high Ni, highly corrosion-resistant nickel-based alloys with extremely high corrosion resistance to both oxidizing and non-oxidizing acids.Incoloy 825 alloy has good general corrosion resistance to both oxidizing and non-oxidizing acids due
2022/08/29 13:41
The difference between cold-rolled steel and hot-rolled steel is not in the smelting process, but in the rolling temperature, or the end temperature of rolling. When the final rolling temperature is lower than the recrystallization temperature of the steel, it is called cold rolled steel. Hot-
2022/08/26 14:03
Loose flange: This kind of flange is often used in the case where the medium temperature and pressure are not high and the medium nozzle is highly corrosive. The loose flange is generally used in combination with the flanging short joint, that is, the flange ring is loosely sleeved outside the
2022/08/25 13:51
First Competition patternNickel alloys are mainly used in the household field, such as electronic and electrical products, TV manufacturing, home appliance manufacturing, etc.It has been predicted that the copper alloy lead frame strip will completely replace the nickel alloy lead frame strip. At
2022/08/24 15:19
How to identify the quality of stainless steel sinks?1. Thickness of water tank steel plate: The high-quality water tank adopts imported 304 stainless steel plate with a thickness of 1mm, while the ordinary low-grade water tank adopts 0.5mm-0.7mm. The method of identification can be determined from
2022/08/23 13:42
Production process:Stainless steel checker plate is divided into two categories:One is rolled by a rolling mill in the production of stainless steel by a steel mill. The thickness of this type of product is about 3-6mm, and it is in the state of annealing and pickling after hot rolling. The process
2022/08/22 13:46
Advantages of thin-walled 90-degree elbows: excellent wear resistance and continuous use.90° elbows are suitable for piping systems in petroleum, natural gas, chemical, hydropower, construction and boiler industries.The straight seam elbow with any large diameter and relatively thin wall thickness
2022/08/19 11:57
Sanitary elbow encyclopediaDepending on your requirements, sanitary elbow can be austenitic or ferritic, and is defined by being seamless and easy to clean, suitable for pharmaceuticals, food and beverage, and drinking water applications.Introduction of sanitary elbow:Material: 304 material and
2022/08/18 14:00
Material name: Martensitic stainless steelBrand: SUS420FStandard: JIS (G 4303 steel bar)●SUS420F features and applications:SUS420 "cutting grade" martensitic steel, the earliest stainless steel similar to Brinell high chromium steel. Also used in surgical knives, can do very bright. SUS420F (13Cr-0
2022/08/17 10:33
The appearance of the stamping elbow is fixed. Of course, the appearance of the general stamping elbow is based on the different knowledge of the steel pipe. Therefore, in order to ensure the appearance of the stamping elbow, usually after the steel pipe comes in , If it has not been washed by the
2022/08/16 11:17
Features of Flat Welding FlangesWhen welding flat welding flanges, only one side welding is required, and there is no need to weld the inner port of the pipe and flange connection. The welding installation of butt welding flanges requires double-sided welding of the flanges. Therefore, flat welding
2022/08/15 13:43
Laying points of stainless steel elbow in pipeline:1. In order to reduce the heat loss of the stainless steel elbow and prevent thermal deformation, the buried depth of the pipeline should be greater than 1.2 meters. (calculated from the top of the pipe). The burial depth in alpine regions should
2022/08/12 12:59
Submitted successfully
We will contact you as soon as possible
Close