UNS N08330-manufacture,factory,supplier from China

Type 301 is an austenitic chromium-nickel stainless steel that is available in the annealed and cold worked conditions. In the annealed condition, Type 301 offers the highest level of stretch formability of any stainless steel and in the heavily cold worked condition offers the highest strength level of any 300 series stainless steel. Type 301 is non-magnetic in the annealed condition but becomes magnetic as a result of cold working.Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.

Alloy K-500 (UNS N05500) is a nickel-copper alloy.

Manufacturer Alloy 330 Incoloy 330 nickel alloy sheet/plate/coilTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K500/R405,etcNitronic 40/50/60/7

SUS 312L UNS S31254 Duplex SS Sheet Stainless Steel Coils for SaleProducts Description         Product Namestainless steel coilsMaterial（DIN）1.4301/1.4306/1.4541/1.4401/1.4404/1.4571/1.4539/1.4410/1.4833/1.4845Thickness0.3-100mmWidth600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcSurface2B, BA, NO.4, Mirror, Hairline, etcStandardJIS, AISI, ASTM, GB, DIN, EN, AISI, ASTM, DIN, EN, GB, JISGrade201/304/304L/321/316/316L/310S/904L/309S/316Ti/317L/2205/2507, etc.TechniqueCold Rolled,Hot RolledCertific

254SMO is an austenitic stainless steel.  Because of its high molybdenum content, it has very high resistance to spot corrosion and crevice corrosion. Main ingredients:254 smo carbon (C) 0.02 or less, manganese (Mn) of 1.00 or less, nickel (Ni) 17.5 ~ 18.5, silicon (Si) of 0.8 or less phosphorus (P) of 0.03 or less, sulfur (S) of 0.01 or less, chromium (Cr) 19.5 ~ 20.5, copper (Cu) 0.5 ~ 1.0, molybdenum (Mo) 6.0 ~ 6.5  National standards: UNS S31254, DIN/EN 1.4547, ASTM A280, ASME SA-240  Welding material: ERNiCrMo-3 wire, ENiCrMo-3 electrode Product Name254smo st

2507 (UNS S32750) duplex stainless steel has strong strength and corrosion resistance, which is mainly used in chemical processing, petrochemical industry and subsea equipment. It has strong chloride corrosion resistance, high thermal conductivity and low coefficient of thermal expansion. The high content of chromium, molybdenum and nitrogen makes it highly resistant to patchy, crevice and general corrosion.

Product Name SS 304 304L 310S 316 316L 321 309S 904L 2205  Stainless Steel Strip Manufacturer Stainless Steel CoilSteel typeAISI 630, AK Steel 17-4PH, UNS 17400JIS SUS630 X5CrNiCU17-04EN 1.4542StandardASTM A564Thickness0.04-10mmWidth5-2000mmFinishingSolution treated + age hardening heat treated ( H900, H1150, H1150D, H1150M, H1075, H1025 etc )Feature of 630High Tensile strength, high hardness after heat treated.Mechanical propertyT.S. (Rm): 1015Mpa, Y.S.

ASTM A790 refers to stainless steel seamless and welded pipes (UNS S31803, UNS S32205, UNS S32750, UNS S32760). These tubes can be easily cut and molded by bending, stretching, extrusion, and other common procedures. Consideration should be given to its high intensity and the resulting larger springbok.

Incoloy 330 is a nickel-ferrichrome austenite alloy.specifically designed for antioxidant and carburizing effects in high-temperature environments.Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines

Well known for its high impact strength, UNS S32760 displays no ductile-brittle transition but only a slight reduction in impact energy as temperature decreases.

304 (UNS S30400, 1.4301) stainless steel is a universal stainless steel, it is widely used to make equipment and machine parts that require good comprehensive performance. In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain more than 18% chromium and more than 8% nickel content. 304 stainless steel is a grade of stainless steel produced in accordance with the American ASTM standard.The most important elements in 304 stainless steel are Ni and Cr, but they are not limited to these two elements.

S31803 Plate S31803 Plate  is a standard duplex grade duplex stainless steel alloy. It has the microstructure of equal austenite to ferrite ratio. SA 240 UNS S31803 Sheet is a combination of reliable mechanical stability, ductility and good corrosion resistance properties.

The C276 alloy (UNS N10276) is used in chemical processing, pollution control, pulp and paper production, industrial and municipal waste disposal, and recovery of "sour" natural gas.

Duplex Steel S31803 Round Bars have high-stress corrosion cracking resistance in halide containing environments and outstanding resistance to erosion corrosion and corrosion fatigue.

600 alloy (UNS NO6600) The alloy is widely used in the chemical industry for its strength and corrosion resistance. Applications include heaters, stills, bubbles and condensers for fatty acid processing; Evaporator tubes, segments and spalling pans for the manufacture of sodium sulfide; And equipment for processing plants.

Alloy 718 (UNS N07718) is a high-strength, nickel-based superalloy made for long-term use in temperatures ranging from cryogenic up to 1200°F.

UNS S32760 is able to compete strongly with the 6% molybdenum “super austenitic” grades in some applications, as it has fewer amounts of Mo and Ni which drive up the base cost of the material. Although, 32760 has lower amounts when compared to “6% Moly” grades it still has higher contents of Cr, Ni, and Mo when referring to other alloys, these elements improve the intergranular and pitting corrosion resistance of the material.

Inconel 625 tubeInconel 625 tube is a nickel-chromium-molybdenum stable answer reinforced alloy with a nominal chemical composition of 61% nickel, 22% chromium, and 9% molybdenum. Inconel 625 tube is regularly referred to through the tradename Inconel 625 and the everyday designation UNS N06625.

S32760 Super Duplex Forged Bar can be produced by following specification standard ASTM A276.Product Parameter：Stainless Steel barMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446,600 series: 13-8ph, 15-5ph, 17-4ph, 17-7ph(630,631), 660A/B/C/D,Duplex: 2205(UNSS31803/S32205), 2507(UNSS32750), UNSS32760, 2304, LDX2101.

Alloy X-750 exhibits excellent oxidation resistance to combustion gases at ambient temperatures up to 1600°F(870°C).Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines, blades, powder and engines，etcFeatureHi

Hastelloy C-2000, named UNS N06200, is a nickel-chromium-molybdenum alloy. Adding a certain amount of copper to sulfuric acid, hydrofluoric acid and dilute hydrochloric acid can improve its temperature resistance. The high chromium content enables maximum resistance to oxidation chemicals and process flows contaminated by iron ions and dissolved oxygen. The alloy has excellent resistance to chloride and corrosion.

Super Duplex Steel UNS S32760 Welded Pipes are multi-purpose and possess good weldability, used widely in the offshore and marine industry for their acid corrosion resistance.S32760 Super Duplex Stainless Steel Pipes are highly alloyed with different metals and have a greater mechanical strength.

347 stainless steel square bar, also known as UNS S34700 and Grade 347, is an austenitic stainless steel made of .08% maximum carbon, 17% to 19% chromium, 2% maximum manganese, 9% to 13% nickel, 1% maximum silicon, traces of phosphorus and sulfur, 1% minimum to 10% maximum columbium and tantalum with the balance of iron.

This nickel based alloy produced in the form of rounds, squares, hexagons, rectangles as well as Alloy 601 Uns N06601 Cold Finished Bar apart from cold- worked wire, have been covered in the ASTM B166 specification.