uns 2507-manufacture,factory,supplier from China

SAF 2507 offers high compressive strength, impact strength, low coefficient of thermal expansion and high thermal conductivity.These characteristics are applicable to many structural and mechanical components.SAF 2507 has high impact strength and is not suitable for prolonged exposure to temperatures higher than 570°F, which may reduce toughness.2507 stainless steel composition content.GradeCMnSiPSCrMoNiN2507Min.Max.≤0.03≤1.2≤0.80≤0.035≤0.0224-263-56-80.24-0.32Chemical CompositionENASTM/UNSCNCrNiMoCOMPOMENT11.43013040.0418.18.321.4307304L0.0218.18.331.45413210.0417.39.1Ti0.2441.45503470.0517.5

2507 (UNS S32750) duplex stainless steel has strong strength and corrosion resistance, which is mainly used in chemical processing, petrochemical industry and subsea equipment. It has strong chloride corrosion resistance, high thermal conductivity and low coefficient of thermal expansion. The high content of chromium, molybdenum and nitrogen makes it highly resistant to patchy, crevice and general corrosion.

Product ShowProduct NameHigh Quality Hot Rolling ASTM 201 304 304L 316 316L 321 904L 2205 2507 Stainless Steel Plate TypeCold rolled / Hot rolledStandard GB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / S31803 / S32750 / S32205 etcMonel 400 / Monel K-500 Inconel 600 / Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 / Inconel X-750Incoloy A-286 / Incoloy 800 / Incoloy 800H / Incoloy 800HTIncoloy 825 / Incoloy 901 / Incoloy 925 / Incoloy 926Nimonic 75 / Nimonic 80A / Nimonic 90

SUS 312L UNS S31254 Duplex SS Sheet Stainless Steel Coils for SaleProducts Description         Product Namestainless steel coilsMaterial（DIN）1.4301/1.4306/1.4541/1.4401/1.4404/1.4571/1.4539/1.4410/1.4833/1.4845Thickness0.3-100mmWidth600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcSurface2B, BA, NO.4, Mirror, Hairline, etcStandardJIS, AISI, ASTM, GB, DIN, EN, AISI, ASTM, DIN, EN, GB, JISGrade201/304/304L/321/316/316L/310S/904L/309S/316Ti/317L/2205/2507, etc.TechniqueCold Rolled,Hot RolledCertific

2507 dual-phase steel density: 8.03g/cm3, melting point: 1300-1390 ℃, magnetic: noneHeat treatment: heat preservation between 1000-1052℃ for 1-2 hours, rapid air cooling or water cooling.Mechanical properties: tensile strength: σb≥795Mpa, yield strength σb≥550Mpa: elongation: δ≥15%, hardness ≤310 (HB)Product Parameter：ItemStandardMaterialStainless SteelASTM201, 202, 301, 304, 304L, 304N, XM21, 304LN, 305, 309S, 310S, 316, 316Ti, 316L, 316N, 316LN, 317, 317L, 321, 347, 329,405, 409, 430, 434, 444, 403, 410, 420, 440A, etc.EN1.4372, 1.4373, 1.4319, 1.4301, 1.4306, 1.4315, 1.4303, 1.4833, 1.4845,

Type 301 is an austenitic chromium-nickel stainless steel that is available in the annealed and cold worked conditions. In the annealed condition, Type 301 offers the highest level of stretch formability of any stainless steel and in the heavily cold worked condition offers the highest strength level of any 300 series stainless steel. Type 301 is non-magnetic in the annealed condition but becomes magnetic as a result of cold working.Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.

2507 Super Duplex Stainless Steel BarsAlloy 2507 is a duplex stainless steel, a super duplex stainless steel composed of 25% chromium, 4% molybdenum and 7% nickel.Main components: 25Cr-7Ni-4Mo-0.27N2507 is a ferritic-austenitic (duplex) stainless steel, also called duplex stainless steel, which has excellent resistance to pitting, crevice corrosion and uniform corrosion.Application areas: pulp and paper industry, seawater desalination, flue gas purification, heat exchangers, chemical tanker piping systems, seawater systems, etc.Product Parameter：Equivalent MaterialsSAF2507, EN 1.4410, UNS S327

Alloy K-500 (UNS N05500) is a nickel-copper alloy.

2205 2507 904L 254SMO POLISHED STAINLESS STEEL SEAMLESS/WELDED PIPE MANUFACTURERItemStainless Steel Tube/PipeSteel grade200series,300 series,400series,duplexStandardASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456,DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216,BS3605,GB13296Material304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201,202SurfacePolishing,annealing,pickling,brightTypehot rolled and cold rolledstainless steel round pipe/tubeSizeWall thickness1mm-150mm(SCH10-XXS)Outer diameter6mm-2500mm (3/8"-100")stainless steel square pipe/tubeSizeWall

Astm A790 Super Duplex 2507 Stainless Steel PipesProduct DescriptionThe chemical composition is :carbon C≤0.15manganese Mn≤1.25silicon Si≤1.00chromium Cr12.0~14.0nickel Ni≤0.60%phosphorus P≤0.06sulfur S≤0.15Molybdenum≤0.60%Product DescriptionProductAstm A790 Super Duplex 2507 Stainless Steel PipesSurface FinishBA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, EmbossedTechniqueHot Rolled / Cold RolledStandardGB JIS ASTM ASME ENSteel Grade200 series: 201 202300 series: 301 304 304L 309 310 310s 316 316L 321400 series: 409 410 410S 420 430ColorStandard RAL color:red,bule,white,grey,brick,etc.Stock Dimension0.5mm

Super Duplex 2507 PipeSuper Duplex 2507 Pipe is a exquisite duplex cloth made steel pipe. The high-quality duplex is an alloy of chromium, molybdenum and nickel. The fabric has very excessive corrosion resistance houses and is resistant to pitting corrosion, crevice corrosion and uniform corrosion as well. The Alloy 2507 Seamless Pipes are produced via a technique referred to as the cold drawing. Cold drawn pipes are seamless or have clean surfaces. They are proper to be used in aesthetic searching and unique applications.

2507 Stainless Steel Square Bar2507 stainless steel is used in the oil and gas industry; offshore Shipotian oil platforms (heat exchanger tubes, water treatment and water supply systems, fire protection systems, water spray systems, water stabilization systems; petrochemical equipment; desalination (desalination) equipment (and equipment in high-pressure pipes, seawater pipes); mechanical and structural components that require both high strength and high corrosion resistance; combustion (exhaust) gas purification equipment.

Duplex 2507 Stainless Steel PlateAlloy 2507 is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment. The steel has excellent resistance to chloride stress corrosion cracking, high thermal conductivity and a low coefficient of thermal expansion.

254SMO is an austenitic stainless steel.  Because of its high molybdenum content, it has very high resistance to spot corrosion and crevice corrosion. Main ingredients:254 smo carbon (C) 0.02 or less, manganese (Mn) of 1.00 or less, nickel (Ni) 17.5 ~ 18.5, silicon (Si) of 0.8 or less phosphorus (P) of 0.03 or less, sulfur (S) of 0.01 or less, chromium (Cr) 19.5 ~ 20.5, copper (Cu) 0.5 ~ 1.0, molybdenum (Mo) 6.0 ~ 6.5  National standards: UNS S31254, DIN/EN 1.4547, ASTM A280, ASME SA-240  Welding material: ERNiCrMo-3 wire, ENiCrMo-3 electrode Product Name254smo st

Stainless steel plate is detection and shaping have to be off-line processing.

2507 Stainless Steel Pipe is a super duplex grade for which elements chromium, nickel and molybdenum are the primary alloyants.

super duplex 2507 round bar is an alloy which has been designed for applications that demand exceptional tensile strength and superior resistance to corrosion as well.Product Parameter：Stainless Steel barMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446,600 series: 13-8ph, 15-5ph, 17-4ph, 17-7ph(630,631), 660A/B/C/D,Duplex: 2205(UNSS31803/S32205), 2507(UNSS32750), UNSS32760, 2304, LDX2101.

S32760 Super Duplex Forged Bar can be produced by following specification standard ASTM A276.Product Parameter：Stainless Steel barMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446,600 series: 13-8ph, 15-5ph, 17-4ph, 17-7ph(630,631), 660A/B/C/D,Duplex: 2205(UNSS31803/S32205), 2507(UNSS32750), UNSS32760, 2304, LDX2101.

Product Name SS 304 304L 310S 316 316L 321 309S 904L 2205  Stainless Steel Strip Manufacturer Stainless Steel CoilSteel typeAISI 630, AK Steel 17-4PH, UNS 17400JIS SUS630 X5CrNiCU17-04EN 1.4542StandardASTM A564Thickness0.04-10mmWidth5-2000mmFinishingSolution treated + age hardening heat treated ( H900, H1150, H1150D, H1150M, H1075, H1025 etc )Feature of 630High Tensile strength, high hardness after heat treated.Mechanical propertyT.S. (Rm): 1015Mpa, Y.S.

ASTM A790 refers to stainless steel seamless and welded pipes (UNS S31803, UNS S32205, UNS S32750, UNS S32760). These tubes can be easily cut and molded by bending, stretching, extrusion, and other common procedures. Consideration should be given to its high intensity and the resulting larger springbok.

Well known for its high impact strength, UNS S32760 displays no ductile-brittle transition but only a slight reduction in impact energy as temperature decreases.

304 (UNS S30400, 1.4301) stainless steel is a universal stainless steel, it is widely used to make equipment and machine parts that require good comprehensive performance. In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain more than 18% chromium and more than 8% nickel content. 304 stainless steel is a grade of stainless steel produced in accordance with the American ASTM standard.The most important elements in 304 stainless steel are Ni and Cr, but they are not limited to these two elements.

Company ProfileSince its establishment Tianjin Xinyuan Stainless Steel Co., Ltd. has been steadily seeking progress with the care and support of colleagues and customers from all walks of life, and has developed into a comprehensive enterprise integrating stainless steel material processing and sales agents.Main materials: 201, 301, 304 (0Cr18Ni9), 304L (00Cr19Ni10), 321 (1Cr18Ni9Ti), 316 (0Cr17Ni12Mo2), 316L (00Cr17Ni14Mo2), 309S (0Cr23Ni13), 310S (0Cr25Ni20), 904L (00Cr20Ni25Mo4.5Gu) 316 , 317L, 317H, 304H, (SUS304, 321, 316, 310S, etc.). Duplex stainless steel (2205, 2507, 2520).

Product Namestainless steel coilsMaterial（DIN）1.4301/1.4306/1.4541/1.4401/1.4404/1.4571/1.4539/1.4410/1.4833/1.4845Thickness0.3-100mmWidth600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcSurface2B, BA, NO.4, Mirror, Hairline, etcStandardJIS, AISI, ASTM, GB, DIN, EN, AISI, ASTM, DIN, EN, GB, JISGrade201/304/304L/321/316/316L/310S/904L/309S/316Ti/317L/2205/2507, etc.TechniqueCold Rolled,Hot RolledCertificationISO9001, SGS, BV, ISO, CEUsedBuilding Industry Machinery, etc.MOQ1 TonPayment termsL/C at sight or T/T (30% as depo