Español
العربية
Русский
Français
Product SpecificationUnit Pipe Length3 meter, 6 meter, 9 meter, 18 meterMaterialStainless SteelProduct DescriptionGradeTensileUltimate/MinYield/MinElongation/Min-KSIMPAKSIMPA%304755153020535304L704852517035These grades of austenitic stainless steels are the most versatile and widely used stainless steels.
Contact Now
2507 Stainless Steel Square Bar2507 stainless steel is used in the oil and gas industry; offshore Shipotian oil platforms (heat exchanger tubes, water treatment and water supply systems, fire protection systems, water spray systems, water stabilization systems; petrochemical equipment; desalination (desalination) equipment (and equipment in high-pressure pipes, seawater pipes); mechanical and structural components that require both high strength and high corrosion resistance; combustion (exhaust) gas purification equipment.
Contact Now
Although this austenitic alloy is a precipitation hardened metal, the 202 Stainless Steel Welded Tubes work well even in conditions where the temperatures are really low. Several carbon or alloy steels tend to crack when used in low temperatures, as the media tends to expand, leading to intermolecular forces applying pressure on the pipes. This pressure in low temperature environments could cause regular pipes to crack, thus leading to failure in the entire processing unit.
Contact Now
Products Description Stainless-steel plate is detection and shaping need to be off-line processing.
Contact Now
MaterialType 304 Stainless SteelShapeformCoilPreparationPaper InterleavedVinyl MaskedThickness26 gaugeThickness0.0235 inches0.5969 mmSize48 x CoilWidth48Sheet Weight per Unit Area0.76 lbs/ft²3.71032 kg/m²FinishNo. 2BNo. 3No. 4ConditionCold Rolled AnnealedNominal Composition0 to 0.25% Carbon1.00% Max. Silicon2.00% Max.
Contact Now
ASTM A790 refers to stainless steel seamless and welded pipes (UNS S31803, UNS S32205, UNS S32750, UNS S32760). These tubes can be easily cut and molded by bending, stretching, extrusion, and other common procedures. Consideration should be given to its high intensity and the resulting larger springbok.
Contact Now
Super Duplex Steel UNS S32760 Welded Pipes are multi-purpose and possess good weldability, used widely in the offshore and marine industry for their acid corrosion resistance.S32760 Super Duplex Stainless Steel Pipes are highly alloyed with different metals and have a greater mechanical strength.
Contact Now
Butt welding ring loose flangeThe purpose of using butt welding ring loose flange is to save materials. The flange plate is made of low-grade material, and the pipe part is made of the same material as the pipe, so as to save material.Butt weld ring loose flange:1. Cost saving. When the pipe material is special and expensive, the cost of welding flanges of the same material is high.2. It is inconvenient for welding or processing or requires high strength. Such as plastic pipes, glass steel pipes and the like.3. Easy to construct.
Contact Now
Threaded flange refers to a flange that uses threads to connect to pipes. When designing, it can be handled as loose flange. The advantage is that there is no need for welding, and the additional moment to the cylinder or pipe when the flange is deformed is very small. The disadvantage is that the flange thickness is large and the cost is high.
Contact Now
Stainless steel 316l din 1.4404 1.4435 welded pipes aenhance great weldability in addition to great corrosion resistance and excellent strength properties. These welded pipes are formed with optimum quality of stainless steel material.
Contact Now
All stainless steel pipes shall be manufactured in length of 6m and may be cut to a required length accordingly to the user's requirement..ItemStainless Steel Tube/PipeSteel grade200series,300 series,400series,duplexStandardASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456,DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216,BS3605,GB13296Material304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201,202,etcSurfacePolishing,annealing,pickling,brightTypehot rolled and cold rolledstainless steel round pipe/tubeSizeWall thickness1mm-150mm(SCH10-XXS)Outer diam
Contact Now
600 alloy (UNS NO6600) The alloy is widely used in the chemical industry for its strength and corrosion resistance. Applications include heaters, stills, bubbles and condensers for fatty acid processing; Evaporator tubes, segments and spalling pans for the manufacture of sodium sulfide; And equipment for processing plants.
Contact Now
Grade 410 stainless steel is a basic, general purpose, martensitic stainless steel. It is used for highly stressed parts, and provides good corrosion resistance, high strength and hardness. Grade 410 stainless steel pipes contain a minimum of 11.5% chromium.
Contact Now
G-30 Nickel Base Alloy PipeHastelloy G30 Seamless Pipes is a corrosion resistant alloy of nickel – chromium – molybdenum that is particularly appropriate for use in oxidizing acids. Hastelloy G30 Seamless Tubes is a excessive Nickel primarily based alloy which suggests best corrosion resistance over most different Nickel and Iron based totally alloys in phosphoric acids as properly as many complicated environments containing incredibly oxidising acids such as nitric, hydrofluoric and sulphuric.
Contact Now
All stainless steel pipes shall be manufactured in length of 6m and may be cut to a required length accordingly to the user's requirement.ItemStainless Steel Tube/PipeSteel grade200series,300 series,400series,duplexStandardASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456,DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216,BS3605,GB13296Material304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201,202SurfacePolishing,annealing,pickling,brightTypehot rolled and cold rolledstainless steel round pipe/tubeSizeWall thickness1mm-150mm(SCH10-XXS)Outer diameter6
Contact Now
All stainless steel pipes shall be manufactured in length of 6m and may be cut to a required length accordingly to the user's requirement.Product Parameters：ItemStainless Steel Tube/PipeSteel grade200series,300 series,400series,duplexStandardASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456,DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216,BS3605,GB13296Material304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201,202SurfacePolishing,annealing,pickling,brightTypehot rolled and cold rolledstainless steel round pipe/tubeSizeWall thickness1mm-150mm(SCH10-
Contact Now
Astm A790 Super Duplex 2507 Stainless Steel PipesProduct DescriptionThe chemical composition is :carbon C≤0.15manganese Mn≤1.25silicon Si≤1.00chromium Cr12.0~14.0nickel Ni≤0.60%phosphorus P≤0.06sulfur S≤0.15Molybdenum≤0.60%Product DescriptionProductAstm A790 Super Duplex 2507 Stainless Steel PipesSurface FinishBA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, EmbossedTechniqueHot Rolled / Cold RolledStandardGB JIS ASTM ASME ENSteel Grade200 series: 201 202300 series: 301 304 304L 309 310 310s 316 316L 321400 series: 409 410 410S 420 430ColorStandard RAL color:red,bule,white,grey,brick,etc.Stock Dimension0.5mm
Contact Now
Internal Stainless steel forged thread flangeThe threaded flanges are connected to the ends of the two pipes, and each flange is installed.
Contact Now
All stainless steel pipes shall be manufactured in length of 6m and may be cut to a required length accordingly to the user's requirement.Product Parameters：ItemStainless Steel Tube/PipeSteel grade200series,300 series,400series,duplexStandardASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456,DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216,BS3605,GB13296Material304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201,202SurfacePolishing,annealing,pickling,brightTypehot rolled and cold rolledstainless steel round pipe/tubeSizeWall thickness1mm-150mm(SCH10-
Contact Now
Through integrated production control, stainless steel foil that is excellent in etching properties and press formability, in addition to ultimately high thickness accuracy, strength, and spring characteristics. Stainless Steel FoilStainless steel foil is produced through the highly accurate rolling of stainless steel to be as thin as 100 mm, thus it has excellent flexibility, lightweight characteristics, and corrosion resistance.
Contact Now
I-beams are specially divided into ordinary i-beams, mild-obligation i-beams and large-flange i-beams. in line with the height ratio of flange and internet, it's miles divided into big, medium and narrow wide flange i-beams. the number one two are produced in size 10-60, this is, the corresponding peak is 10 cm-60 cm. light-weight i-beams have slender flanges, skinny webs and mild weight for the identical height. large flange i-beam, moreover called h-beam, is characterised via parallel legs and no slope at the interior of the legs.
Contact Now
Pipe flanges connect pipes, valves, pumps and other equipment in a piping system. Flanges are usually welded or screwed into the systems and then joined with bolts. The eight types of pipe flanges are available in round, square and rectangular shapes.Blind FlangesA blind, or blanking, flange is a round plate with no center hold (but with bolt holes) that closes the ends of piping systems.Lap Joint FlangesPiping fitted with lapped pipe or with lap joint stub ends often use lap joint flanges.
Contact Now
LDX 2101* is a duplex (austenitic-ferritic) stainless steel with relatively low contents of alloying elements. The grade has high mechanical strength, similar to that of other duplex grades. Its good corrosion resistance is on par with that of most standard stainless steel grades.
Contact Now
Inconel 825 PipeInconel 825 Pipes are constructed from primary factors like iron, nickel, and chromium, which supply the primary resistance to rusting and pitting in ordinary temperatures. Inconel 825 Pipe has some introduced factors in small parts like molybdenum, titanium, and copper which provides greater substance to the product and will increase its workability even in marine conditions.
Contact Now
