stainless steel i beam cost-manufacture,factory,supplier from China

An l -beam is shaped like an I. The I beam consists of two horizontal planes, known as flanges, connected by one vertical component, or the web. I-beam has tapered edges and it gets its name from the fact that it looks like a capital I when you see it from its cross section.

I-beam, also known as steel beam (English name Universal Beam), is a long strip of steel with an I-shaped section. I-beams are divided into ordinary I-beams and light I-beams.

1 Stainless-steel attitude sheet blanketed with wooden plate for protection in transportation.2. All chrome steel attitude twill be loaded in strong timber applications.3. Every cartons loaded with well shoring and strengthening.4. Take discipline loading pics and seal the field.5. Transportation tempo is short.

I-beam, also referred to as metal beam (english name usual beam), is a long steel with the phase of the i-fashioned.

The most common beam in our inventory, the I beam’s center web can only be rolled as much as a mill’s equipment can handle (5/8″).

301 Stainless Steel I-Beam widely used in buildings or other metal structures.Product Parameter：Product namestainless steel H-beam / I-beamStandardJIS, AiSi, ASTM, GB, DIN, ENSize100mm-900mmWall thickness1.5mm-28mmMaterial grade301 303 303Cu 304 304J1 304L 316 316L 309S 310S 316Ti 321 430 420 410 409L 904LApplicationHardware products, medical machinery, food machinery, ships, cars, doors and Windows, furniture, large machinery, etcProcessing ServiceBending, Welding, Decoiling, Punching, Cutting, MouldingK

Stainless Steel 303 I-Beam is capable of extreme temperature use up to and beyond 2200 Degree F (1200 Degree C).Product Parameter：Product namestainless steel H-beam / I-beamStandardJIS, AiSi, ASTM, GB, DIN, ENSize100mm-900mmWall thickness1.5mm-28mmMaterial grade301 303 303Cu 304 304J1 304L 316 316L 309S 310S 316Ti 321 430 420 410 409L 904LApplicationHardware products, medical machinery, food machinery, ships, cars, doors and Windows, furniture, large machinery, etcProcessing ServiceBending, Welding, Decoi

I-beams are specially divided into normal i-beams, mild-responsibility i-beams and huge-flange i-beams. in line with the height ratio of flange and internet, it is divided into huge, medium and slim wide flange i-beams. the primary two are produced in size 10-60, this is, the corresponding peak is 10 cm-60 cm.

The 304J1 Stainless Steel has a spectacular surface quality, so it can be used for kitchen utensils, tableware, decorative and other purposes.Product Parameter：Product namestainless steel H-beam / I-beamStandardJIS, AiSi, ASTM, GB, DIN, ENSize100mm-900mmWall thickness1.5mm-28mmMaterial grade301 303 303Cu 304 304J1 304L 316 316L 309S 310S 316Ti 321 430 420 410 409L 904LApplicationHardware products, medical machinery, food machinery, ships, cars, doors and Windows, furniture, large machinery, etcProces

Stainless Steel I Beam (H-beam)1. Standard: AISI, ASTM, GB, JIS, BS, DIN2. Material: 201, 301, 304, 309S, 310S, 316, 316L, 321, 410, 430 & others3. Size: 100× 68× 4.5mm-630× 178× 15mm4. Surface: Annealed, pickled5. Technique: Welded6. Shape: H/I shape7. Applications: Widely used in all kinds of architecture and engineering structure, such as the beam, bridges, transmission tower, hoisting.8. Packaging: Standard export packing or according to customer's request11. Delivery Time: According to the quantity12. Payment: L/C or T/T13.

I-beams are specially divided into ordinary i-beams, mild-obligation i-beams and large-flange i-beams. in line with the height ratio of flange and internet, it's miles divided into big, medium and narrow wide flange i-beams. the number one two are produced in size 10-60, this is, the corresponding peak is 10 cm-60 cm. light-weight i-beams have slender flanges, skinny webs and mild weight for the identical height. large flange i-beam, moreover called h-beam, is characterised via  parallel legs and no slope at the interior of the legs.

The 304l stainless-steel i-beam is a chromium-nickel grade of metallic. it includes 8 percentage nickel and 18 percent chromium. it's miles a with ease machinable metallic that has remarkable formability and weldability. it has desirable corrosion-resistance and is even able to face up to intergranular corrosion, which could arise after welding or stress relieving. as it has a low content material of carbon, it could be accurately utilized in maximum welded construction operations that use temperatures no better than 800 tiers f.

430 stainless steel is a general-purpose steel with good corrosion resistance, better thermal conductivity than austenite, smaller thermal expansion coefficient than austenite, heat-resistant fatigue, adding stabilizing element titanium, and good mechanical properties of welds.Product Parameter：Product namestainless steel H-beam / I-beamStandardJIS, AiSi, ASTM, GB, DIN, ENSize100mm-900mmWall thickness1.5mm-28mmMaterial grade301 303 303Cu 304 304J1 304L 316 316L 309S 310S 316Ti 321 430 420 410 409L 904LApplicat

409L stainless steel has excellent corrosion resistance, high temperature resistance, low cost, good flexibility, high material rate, easy to replace, belong to the environmental protection of the new products.Product Parameter：Product namestainless steel H-beam / I-beamStandardJIS, AiSi, ASTM, GB, DIN, ENSize100mm-900mmWall thickness1.5mm-28mmMaterial grade301 303 303Cu 304 304J1 304L 316 316L 309S 310S 316Ti 321 430 420 410 409L 904LApplicationHardware products, medical machinery, food machinery, ships, cars, doors and Windows, furniture, large machinery, etcProcessing ServiceBending, Weldin

I-Beam steel is lighter than H-Beam steel, but not as strong as H-Beam steel, and can be purchased according to demandProduct Parameter：Product namestainless steel H-beam / I-beamStandardJIS, AiSi, ASTM, GB, DIN, ENSize100mm-900mmWall thickness1.5mm-28mmMaterial grade301 303 303Cu 304 304J1 304L 316 316L 309S 310S 316Ti 321 430 420 410 409L 904LApplicationHardware products, medical machinery, food machinery, ships, cars, doors and Windows, furniture, large machinery, etcProcessing ServiceBending, Welding,

316L stainless steel h beam has low cost, high precision, low residual stress, no expensive welding materials and weld inspection, and can save about 30% of steel structure production cost.Product Parameter：Product namestainless steel H-beam / I-beamStandardJIS, AiSi, ASTM, GB, DIN, ENSize100mm-900mmWall thickness1.5mm-28mmMaterial grade301 303 303Cu 304 304J1 304L 316 316L 309S 310S 316Ti 321 430 420 410 409L 904LApplicationHardware products, medical machinery, food machinery, ships, cars, doors and Windows, furniture, large machinery, etcProcessing ServiceBending, Welding, Decoiling, Pu

We produce and distribute hot rolled and laser fused stainless steel angles during the arena in both imperial and metric sizes. Please pick out the catalog on your location underneath to view a listing of available fashionable size angles. We are a profile solutions enterprise, and custom shapes, sizes and alloys are to be had upon request.If you do now not see what you are looking for, please touch us, and our experienced body of workers will help guide you along with your custom profile needs.Products DescriptionProduct namestainless steel H-beam / I-beamStandardJIS, AiSi, ASTM, GB

We produce and distribute hot rolled and laser fused stainless steel angles at some point of the area in each imperial and metric sizes. Please pick out the catalog on your location under to view a listing of to be had elegant size angles. We're a profile answers employer, and custom shapes, sizes and alloys are to be had upon request.In case you do now not see what you are searching out, please touch us, and our skilled frame of workers will help guide you along side your custom profile needs.Products DescriptionProduct namestainless steel H-beam / I-beamStandardJIS, AiSi, ASTM,

H Beam – The H-Beam is stronger than the I-beam, but it requires much more effort to produce in the process. Instead of being rolled together as one piece, an H-Beam is three pieces individually created and welded together. This allows each portion to be much stronger because you’re using the milling equipment three times to reinforce material as opposed to using the equipment once to make one item.

Stainless steel beams can be extruded, hot rolled or laser fused products. Stainless steel's high strength, toughness and corrosion resistance make it an excellent material for structural support applications in corrosive environments. Its bactericidal and disinfecting capabilities make stainless steel beams ideal structural support for food service, food processing and pharmaceutical applications, elevators, joists, building construction, trailer and truck bed frames, mezzanines and more.

Austenitic stainless steel refers to stainless steel with an austenitic structure at room temperature. When the steel contains about 18% Cr, 8%-25% Ni, and about 0.1% C, it has a stable austenite structure. Austenitic chromium-nickel stainless steel includes the famous 18Cr-8Ni steel and the high Cr-Ni series steel developed by adding Cr and Ni content and adding Mo, Cu, Si, Nb, Ti and other elements on this basis. Austenitic stainless steel is non-magnetic and has high toughness and plasticity, but its strength is low. It is impossible to strengthen it through phase transformation.

Heat treatment can’t be used to harden this metal. In order to achieve tensile strength and hardness, cold working must be done. When cold working is used, slight magnetism may occur. It is very common for 304 steel to be used for parts that require grinding, welding, polishing and machining, along with corrosion resistance. Because of its ability to handle corrosive environments, it is considered a general all-purpose grade of steel. It is commonly used in chemical industries and for cryogenic services.

Product Parameter：StandardASTM A479,ASTM A276,ASTM A484, ASTM A582,ASME SA276, ASME SA484, GB/T1220, GB4226, etc.Material301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 310S, 201,202321, 329, 347, 347H 201, 202, 410, 420, 430, S20100, S20200, S30100, S30400, S30403, S30908, S31008, S31600, S31635, etc.SpecificationsRound barDiameter:0.1~500mmAngle barSize: 0.5mm*4mm*4mm~20mm*400mm*400mmFlat barThickness0.3~200mmWidth1~2500mmSquare barSize: 1mm*1mm~800mm*800mmH BeamThickness7-35mmSurfaceBlack, peeled, polishing, bright, sand blast, hair line, etc.Price TermEx-work, FOB, CFR, CIF, etc.Export to

 Alloy 420 can be hardened by cold working and by heat treating.