Stainless Steel Foil-manufacture,factory,supplier from China

Through integrated production control, stainless steel foil that is excellent in etching properties and press formability, in addition to ultimately high thickness accuracy, strength, and spring characteristics. Stainless Steel FoilStainless steel foil is produced through the highly accurate rolling of stainless steel to be as thin as 100 mm, thus it has excellent flexibility, lightweight characteristics, and corrosion resistance.

According to the main chemical composition is divided into chromium stainless steel, chromium nickel stainless steel and chromium manganese nitrogen stainless steel; Can also be divided into acid resistant stainless steel and heat resistant stainless steel with performance characteristics; It is usually classified by metallographic structure.

410 Stainless Steel Checker Plate410 stainless steel contains 0.15% carbon and 13% chromium. It is a semi martensitic stainless steel. After quenching and tempering, it has high strength and toughness. It has good corrosion resistance and machining performance in a weak corrosive medium with a temperature not exceeding 30 degrees. It also has rust and corrosion resistance in wet atmosphere and fresh water, and has high thermal stability below 700 ℃.

AISI 309L Stainless Steel Wire309S stainless steel -- S30908 (American AISI, ASTM) 309S. Most of the steel mills produce 309S stainless steel, which has good corrosion resistance and high temperature resistance. Withstands high temperatures of 980°C. Mainly used in boiler, chemical and other industries.

304 stainless steel is a common stainless steel material, density of 7.93 g/cm³, the industry is also known as 18/8 stainless steel.

Type  Stainless Steel SheetThicknessASIS,ASTM,DIN,JIS,JB,SUS,EN,etc.Size1000*2000mm, 1219*2438mm, 1219*3048mm or customized Max.

630 stainless steel is martensitic precipitation hardening stainless steel.

Type 301 is an austenitic chromium-nickel stainless steel that is available in the annealed and cold worked conditions. In the annealed condition, Type 301 offers the highest level of stretch formability of any stainless steel and in the heavily cold worked condition offers the highest strength level of any 300 series stainless steel. Type 301 is non-magnetic in the annealed condition but becomes magnetic as a result of cold working.Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.

202 stainless steel is one of the 200 series stainless steel.

Our stainless steel plates can be used for the following range of applicationsChemical industriesOil & GasAviation & AerospacePetrochemicalsPharmaceuticalsWe provide high and fine focus plasma, waterjet & laser cutting.304/1.403 Stainless6 mm8 mm10 mm12 mm14 mm15 mm16 mm18 mm20 mm22 mm25 mm28 mm30 mm32 mm35 mm36 mm40 mm45 mm50 mm55 mm60 mm65 mm70 mm75 mm80 mm90 mm100 mm110 mm120 mm130 mm150 mm 304L/1.4307 stainless6 mm8 mm10 mm12 mm14 mm15 mm16 mm18 mm20 mm22 mm25 mm28 mm30 mm32 mm35 mm36 mm40 mm45 mm50 mm55 mm60 mm65 mm70 mm75 mm80 mm90 mm100 mm110 mm120 mm130 mm150 mm 3

316L Stainless steel channelThe main purpose of hot-rolled stainless steel common channel steel: common channel steel is mainly used in building structures, vehicle manufacturing and other industrial structures, and is often used in conjunction with I-beams.The commonly used stainless steel channel materials for stainless steel production are: 201, 202, 301, 304, 321, 316, 316L, and special materials can generally be customized.316L Stainless steel channel details:Product NameStainless steel channelMaterial201,304,316,321,347h,309s,310s904lThickness1.5mm/1.9mm/2.0mm/2.5mm/2.7mm12GA/14GA/16GA/0

Stainless steel mind-set is a product which has  legs to shape a ninety degree angle.This product is designed for use in each structural applications and fashionable fabrication.Stainless steel thoughts-set’s kind of packages are massive and can encompass trailer manufacturing, protection cages, walkways and farming system.

254SMO is an austenitic stainless steel.  Because of its high molybdenum content, it has very high resistance to spot corrosion and crevice corrosion. Main ingredients:254 smo carbon (C) 0.02 or less, manganese (Mn) of 1.00 or less, nickel (Ni) 17.5 ~ 18.5, silicon (Si) of 0.8 or less phosphorus (P) of 0.03 or less, sulfur (S) of 0.01 or less, chromium (Cr) 19.5 ~ 20.5, copper (Cu) 0.5 ~ 1.0, molybdenum (Mo) 6.0 ~ 6.5  National standards: UNS S31254, DIN/EN 1.4547, ASTM A280, ASME SA-240  Welding material: ERNiCrMo-3 wire, ENiCrMo-3 electrode Product Name254smo st

The  surface of stainless steel is thin and dense with chrome-rich oxide film, which makes the Rectangular stainless steel water pipe  have good corrosion resistance in all the water including soft water, even if it is buried in the ground, it also has excellent corrosion resistance.    On the spot corrosion test data shows that the service life of Rectangular stainless steel water pipe can reach 100 years, the life cycle  almost does not need to maintain, avoided the cost of pipeline replacement and trouble, comprehensive use cost is low.Speciflcation:ItemStainless St

Stainless steel with 12%~30% chromium and ferritic matrix of body - centered cubic lattice at high temperature and room temperature. This kind of steel generally does not contain nickel, some contain a small amount of molybdenum, titanium or niobium and other elements, with good oxidation resistance, corrosion resistance and chloride corrosion cracking resistance.

1. Compared with 316L and 317L austenitic stainless steel,2205 alloy has better performance in corrosion resistance and crack corrosion, it has high corrosion resistance, compared with austenite, its thermal expansion coefficient is lower, higher thermal conductivity.2. Compared with austenitic stainless steel, the compressive strength of duplex stainless steel 2205 alloy is twice that of austenitic stainless steel. Compared with 316L and 317L, the designer can reduce its weight.

304 is a universal stainless steel, which is widely used in the manufacture of equipment and parts requiring good comprehensive properties (corrosion resistance and formability). To maintain the corrosion resistance inherent in stainless steel, the steel must contain at least 18% chromium and at least 8% nickel.

Most people have something made of stainless steel in their homes, whether it’s a kitchen appliance, some hardware, or even a piece of décor. Almost everybody knows what stainless steel is and what it looks like. Something that surprises many people is finding out there are actually multiple kinds of stainless steel. Check out this guide to learn more about the different types of stainless steel. Austenitic Austenitic stainless steel is designed to be nonmagnetic. A great example of an everyday application for austenitic stainless steel is a stainless steel oven.

Stainless-steel coil/strip;stainless steel 430 ba coil; stainless steel cold rolled strip;stainless-steel cold rolled coil;stainless steel coil 201/304/430 merchandise description product name:cold rolled stainless-steel coils, cease 2b/ba, mild deep drawing great 1) grade: 201, 304, 410, 430 etc.

Stainless steel elbow is suitable for all kinds of water quality, in addition to disinfection and sterilization, do not need to control the water quality, at the same time, there is no corrosion and excessive exudate, can keep the water pure health, put an end to secondary pollution, can withstand up to 30 meters per second high water impact.

Stainless-steel sample plate is embossed by way of mechanical gadget on the chrome steel plate, in order that the floor of the concave and convex pattern.  Due to the splendid corrosion resistance and skid resistance of stainless steel sample plate has been used by many industries and started to be famous.  The pattern sample of the earliest stainless-steel sample plate is horizontal and vertical stripes crisscrossed, inside the subsequent 20-30 years researchers through non-stop experiments and improvements to have a higher anti-skid sample design is now additionally big-scale produ

Stainless Products supplies stainless steel seamless tube per ASTM A 213, ASTM A 269 and ASTM A 511. We supply common grades of stainless steel such as 304/304L and 316/316L in standard tube sizes and wall thicknesses.

Providing the ultimate in corrosion, rust, stain and temperature resistance, the 410 Stainless Steel  is the most universal screw for almost any application and provides:Stainless steel finish provides a decorative aesthetic and superior corrosion resistanceSuperior holding strengthThe ability to withstand harsh conditionsLong-lasting performanceA reputation for quality, strength and ease of installation from industry professionalsOTHER APPLICATIONSPool enclosures, environmental, coastal construction, water and utilities, boat building, wastewater and sanitation.FAMILYHEAD TYPEANCHOR

Stainless steel plate  is a kind of hollow section and not using a seams round.the thicker the thickness of the product, stainless steel plate is more cost-effective and sensible, the thinner the wall thickness, stainless steel plate's processing expenses will upward thrust appreciably.Stainless steel plate of its constrained performance of the choice, the overall low precision seamless steel pipe : wall thickness is not uniform, stainless steel plate's surface brightness is low, stainless-steel plate's cost of h