Stainless Steel 316 Sheets-manufacture,factory,supplier from China

Stainless steel is popular because it does not easily stain, corrode, or rust when it comes into contact with water. This sets it apart from ordinary steel while still retaining the strength of the material. This makes stainless steel foil sheets or stainless steel rolls a popular choice for both industrial and commercial applications. To endure different environments, there are a variety of surface finishes and grades for this material. The addition of chromium is what allows this material to avoid rust and survive in harsh environments that steel usually cannot.

Surface Treatment  Surface FinishDefination2BThose finished,after cold rolling,by heat treatment,picking or other equivalent treatment and lastly by cold rolling to givenappropriate lusterBAThose processed with bright heat treatment after cold rollingNo.1The surface finished by heat treatment and picking or processes corresponding there to after hot rollingNo.4Those finished by polishing with No.150 to No.180 abrasives specified in JIS R 6001HLThose finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size8KA mirror-like reflective surface

SS 304 Sheets & Plates have a wide array of usage for their availability in various forms and finishes. These sheets are available in different finishes like mechanically brushed finishes to Mill Finishes, as well as in textures finishes, therefore they are suitable for use not only indoor but also outdoor usage. It has high longevity because of high oxidation and corrosion resistance and can be used deep drawn and under marine conditions. It can resist oxidation in infrequent service in temperatures ranging between 870 degrees C and 925 degrees C.

Specification of Stainless Steel Sheets, Plates & Coils Specifications : ASTM A240 / ASME SA240Thickness : 0.1mm to 12 mm ThkSheet/Plate Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm.Coil Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc.Coil Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc.Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching.Finish : Hot rolled (HR), Cold rolled (CR), SATIN (Met with Plasti

SAE / ANSI / AISI 316 is the second most commonly available/widely used type of stainless steel after the SAE/ANSI/AISI 304. Considered the generic workhorse, SS 304 can serve in most situations with great success.

How to identify the quality of stainless steel sinks?1. Thickness of water tank steel plate: The high-quality water tank adopts imported 304 stainless steel plate with a thickness of 1mm, while the ordinary low-grade water tank adopts 0.5mm-0.7mm. The method of identification can be determined from the weight and whether the surface is flat.2. Anti-noise treatment: The bottom of the high-quality sink is sprayed or glued with rubber sheets and does not fall off, which can reduce the sound caused by the impact of the water from the faucet on the bottom of the basin, and play a buffering role.3.

314 stainless steel has high high temperature strength and oxidation resistance, is more sensitive to sulfur-containing atmosphere, and has a tendency to embrittlement of precipitates at 600-800 °C. It is suitable for making various furnace components under stress.316 stainless steel, 18Cr-12Ni-2.5Mo With the addition of Mo, its corrosion resistance, atmospheric corrosion resistance and high temperature strength are particularly good, and can be used under harsh conditions; excellent work hardening (non-magnetic).

Common stainless steelsThe  maximum not unusualplace stainless-steel grades are 304 and 316. The key distinction is the addition of molybdenum, an alloy which appreciably complements corrosion resistance, specially for extra saline or chloride-uncovered environments.316 stainless-steel carries molybdenum. 304 stainless-steel does not.For out of doors fixtures like rails and bollards, stainless-steel is a great corrosion-resistant material, however it's going to simplest face up to long-time period publicity if the grade is suitable for its environment.

Stainless steel pipe is used for transporting liquids and gasses in a wide range of industries including mining, oil, natural gas, automotive, and aviation. We carry a wide range of stainless steel pipe schedules: 304 Sched. 5, 304 Sched. 10, 304 Sched. 40, 304 Sched. 80, 316 Sched. 10, 316 Schedule 40, and 316 Sched. 80. Our stainless steel pipe for sale is available in standard sizes, or you can have it custom cut to your specifications.

321 Stainless Steel321 Stainless Steel is an austenitic chromium-nickel alloy that incorporates titanium. This alloy has greater corrosion resistance than most grades of stainless steel. It additionally presents most excellent energy at excessive temperatures in contrast to different grades of stainless steel. This makes 321 stainless metal well-suited for functions involving multiplied temperatures, such as warmth exchangers, recuperators, and furnaces.316 Stainless Steel316 Stainless Steel is an austenitic chromium-nickel alloy that contains molybdenum and low levels of carbon.