Monel 400 Round Bars-manufacture,factory,supplier from China

Monel 400 Round BarsMonel 400 Round Bar is a ductile, nickel-copper based totally alloy comprised in truth of two-thirds nickel and one 1/3 copper. Nickel Alloy four hundred is recognised for resistance to a range of corrosive conditions, together with alkalies (or acid like substances), saltwater, hydrofluoric acid and sulfuric acid.

Monel 400 PipeMonel 400 Pipe belongs to the copper-nickel corrosion-resistant alloy, which is the corrosion-resistant alloy with the greatest consumption, the most versatile and extremely good complete performance. Monel 400 Pipe has fantastic corrosion resistance in hydrofluoric acid and fluorine fuel medium, and additionally has exquisite corrosion resistance to warm focused lye. At the equal time, Monel 400 Pipe is resistant to corrosion from impartial solutions, water, sea water, air, natural compounds, etc.

Monel 400 PlateMonel 400 Plate is a copper-nickel base alloy plate. Along with these, it is traced with the quantity of manganese, silicon, and carbon content. These Monel 400 Plates have proper ductility and facilitate most suitable resistance to a extensive vary of corrosive circumstances. These plates show off terrific resistance to alkaline and acidic environment. However, it posses extraordinary thermal conductivity in annealed conditions. This grade of plates consists of excessive tensile energy and toughness.

Monel K500 Round BarMonel K500 Round Bar is a age hardened alloy, whose basic composition makeup consists of elements like Nickel&Copper. Which combines the corrosion resistance of Alloy 400 with the high strength, fatigue resistance and erosion resistance.Monel K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminium and titanium. Monel K500 has excellent corrosion resistant characteristics.

Monel 400 Inconel 600 601 625 718 750 X-750 N07750 4x8 Feet Stainless Steel Sheet/plate Price Per KgTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel

Inox 329 Round Bars has exposure to moderate and high temperature, where less rapid cooling may cause embrittlement.

 DIN 2.4375/MONEL K-500/UNS N05500 Alloy Steel Plate TypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K500/R405,etcNitronic 40/50/60/75

Product SpecificationThickness/Diameter>4 inchSingle Piece Length3 meter, 6 meterMaterialStainless SteelShapeRoundDiameter6 to 400 mmLength1 ~ 8 metersProduct DescriptionWe stock Bar, Hexagon, Square, Round products in various dimensions and grades. We stock Stainless steels supplied in the as rolled, annealed and normalized conditions.

Chemical compositionCarbon (C) : 0.15 or lessSilicon (Si) : 1.00 or lessManganese (Mn) : 5.5 ~ 7.50Chromium (Cr) : 16.0 ~ 18.0Nitrogen (N) : 0.25 or lessPhosphorus (P) : 0.060 or lessSulfur (S) : 0.030 or lessNickel (Ni) : 3.5 to 5.5See the ASTM A666TechniqueForged/Hot Rolled/Cold Drawn/PeeledCategory1.Round bar1)Hot rolled black bar: (5-400)x6000mm or according to your requirement.2)Acid round bar: (5-400)x6000mm or according to your requirement.3)Cold drawn bright bar: (1-20)x6000mm or according to your requirement.4)Polishing round bar: (5-400)x6000mm or according to your requests.2.

Super Duplex Stainless Steel S32750 Round bars contain chromium, molybdenum and nitrogen additions that are resistant to localised corrosion, such as pitting and crevice attack. Product Parameter：Stainless Steel barMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446,600 series: 13-8ph, 15-5ph, 17-4ph, 17-7ph(630,631), 660A/B/C/D,Duplex: 2205(UNSS31803/S32205), 2507(UNSS32750), UNSS32760, 2304, LDX2101.

300 series stainless steel round rod :316 stainless steel round rod, 304L stainless steel round rod, 304 stainless steel round rod, 310 stainless steel round rod, 303 stainless steel round rod, 302 stainless steel round rod, 301 stainless steel round rod,200 series stainless steel round rod :202 stainless steel round rod, 201 stainless steel round rod,400 series stainless steel round bar :410 stainless steel round bar, 420 stainless steel round bar, 430 stainless steel round bar300 series stainless steel round rod details:316L stainless steel round rod :316 stainless steel contains molybdenum

Inconel 718 Round BarInconel 718 Round bars are stable cylindrical bars made from the high-strength & corrosion-resistant nickel-based superalloy recognised as Inconel 718. The spherical bar is normally machined or solid to the favored structure & size, and it can be heat-treated to decorate its mechanical properties. The aerospace, nuclear, & gasoline turbine industries oftentimes use these bars requiring high-temperature and high-stress resistance. Inconel 718 spherical bar is handy in a number of sizes & lengths.

TypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K500/R405,etcNitronic 40/50/60/75/80A/90/A263 ;etcSpecificationWire: 0.01-10mm /Strip: 0.05*5.0-

Duplex Steel S31803 Round Bars have high-stress corrosion cracking resistance in halide containing environments and outstanding resistance to erosion corrosion and corrosion fatigue.

The chemical composition of Monel400 alloy is mainly composed of 30%Cu and 65%Ni plus a small amount of Fe(1%-2%). The structure is typical monophasic austenite.

Introduction of Stainless steel round barPopular for its corrosion resistance, stainless steel rod is used in a wide range of applications including the construction of building foundations, bridges, and marine environments.We have black bright surface, and different materials such as 201 304 304L 316 316L 2205 2507 430 420 410 for you to choose.StandardASTM A479,ASTM A276,ASTM A484, ASTM A582, ASME SA276, ASME SA484, GB/T1220, GB4226, etc.Material301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 

Stainless Steel Round Tube Material304:0cr18ni9, 0cr17ni8201:1cr17mn6ni5n,1cr13mn9ni1n316:0cr17ni12 or as customer's requestSize(round pipe)9.5, 12.7, 15.9, 17, 18, 19.1, 20, 21, 22.2, 23, 25.4, 28, 318, 35,60, 63.5, 73, 76.2, 88.9, 101.6, 114.3, 127, 133, 159, 168, 219 mm or customizedSize (square pipe)10×10,12×12,18×18,23×23,38×38,50×50,70×70,100×100,20×10,23×10,24×12,25×13,36×23,40×20,50×20,60×15,75×45,80×60,9

Alloy 400 (UNS N04400) is a single-phase solid-solution nickel-copper alloy with excellent corrosion resistance to a wide range of media.Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines, blades, powder and

SAF 2507 offers high compressive strength, impact strength, low coefficient of thermal expansion and high thermal conductivity.These characteristics are applicable to many structural and mechanical components.SAF 2507 has high impact strength and is not suitable for prolonged exposure to temperatures higher than 570°F, which may reduce toughness.2507 stainless steel composition content.GradeCMnSiPSCrMoNiN2507Min.Max.≤0.03≤1.2≤0.80≤0.035≤0.0224-263-56-80.24-0.32Chemical CompositionENASTM/UNSCNCrNiMoCOMPOMENT11.43013040.0418.18.321.4307304L0.0218.18.331.45413210.0417.39.1Ti0.2441.45503470.0517.5

Alloy X-750 exhibits excellent oxidation resistance to combustion gases at ambient temperatures up to 1600°F(870°C).Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines, blades, powder and engines，etcFeatureHi

Alloy 400 from NeoNickel has superb corrosion resistance, particularly in neutral and alkaline salts. It is also one of a limited number of alloys that can be used in conjunction with hydrofluoric acid and fluorine. With high nickel content, this alloy is immune to chloride-induced stress corrosion cracking.

ASME B16.5 SpecificationsSpecificationASME B16.5 FlangeType Of Industrial flangesBlind Flange/ Slip On Flange/ Weld Neck Flange/ Socket Weld Flanges/ RTJ Flanges/ Lap Joint Flanges/ Threaded/ Reducing FlangesFlanges Manufacturing MaterialStainless Steel, Brass, Bronze, Duplex Steel, Super Duplex, Incoloy, Alloy 20, Copper, Carbon Steel, Nickel Alloys, Tantalum, Cupro-Nickel Inconel, Monel, Titanium, Hastalloy, Alloy Steel.Type Of Pipe Flange MethodsForging/ Casting/ Rolling And CuttingANSI Flange Pressure ClassClass 150/ Class 300/ Class 400/ Class 600/ Class 600/ Class 900/ Class 1500/ Class

Bars are the most common raw material used by industries in various shapes and sizes, one such shape of the bar is Alloy 926 Round Bar. The most common shapes of Bars are Alloy 926 Round Bar, Alloy 926 Square Bar, Alloy 926 Rectangle Bar, and Alloy 926 Hex Bar.

Product ShowProduct NameHigh Quality Hot Rolling ASTM 201 304 304L 316 316L 321 904L 2205 2507 Stainless Steel Plate TypeCold rolled / Hot rolledStandard GB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / S31803 / S32750 / S32205 etcMonel 400 / Monel K-500 Inconel 600 / Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 / Inconel X-750Incoloy A-286 / Incoloy 800 / Incoloy 800H / Incoloy 800HTIncoloy 825 / Incoloy 901 / Incoloy 925 / Incoloy 926Nimonic 75 / Nimonic 80A / Nimonic 90