Martensite-manufacture,factory,supplier from China

The machinability of grade 202 stainless steel produces long, gummy chips. Machining can also be performed in the annealed condition. For heat treatment, the material has to be soaked at 1038°C (1900°F) for 30 min and cooled below 16°C (60°F) for full martensite transformation. The material can be welded by common fusion and resistance methods; however, this steel should not be joined using oxyacetylene welding method. The recommended filler metal is AWS E/ER630. Forging can be done by pre-soaking for 1 h at 1177°C (2150°F).

Austenitic stainless steel refers to stainless steel with an austenitic structure at room temperature. When the steel contains about 18% Cr, 8%-25% Ni, and about 0.1% C, it has a stable austenite structure. Austenitic chromium-nickel stainless steel includes the famous 18Cr-8Ni steel and the high Cr-Ni series steel developed by adding Cr and Ni content and adding Mo, Cu, Si, Nb, Ti and other elements on this basis. Austenitic stainless steel is non-magnetic and has high toughness and plasticity, but its strength is low. It is impossible to strengthen it through phase transformation.

Type 201 Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. Type 201 is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked.

Metallographic structure of Hastelloy B-3    Hastelloy B-3 has a face-centered cubic lattice structure.

Application：Widely used in petroleum,foodstuff,chemical industry,construction, electricProduct Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines, blades, powder and engines，etcFeatureHigh corrosion resistance, low

ApplicationWidely used in petroleum,foodstuff,chemical industry,construction, electricProduct Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines, blades, powder and engines，etcFeatureHigh corrosion resistance, low d

Monel K500 Round BarMonel K500 Round Bar is a age hardened alloy, whose basic composition makeup consists of elements like Nickel&Copper. Which combines the corrosion resistance of Alloy 400 with the high strength, fatigue resistance and erosion resistance.Monel K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminium and titanium. Monel K500 has excellent corrosion resistant characteristics.

Monel 400 PlateMonel 400 Plate is a copper-nickel base alloy plate. Along with these, it is traced with the quantity of manganese, silicon, and carbon content. These Monel 400 Plates have proper ductility and facilitate most suitable resistance to a extensive vary of corrosive circumstances. These plates show off terrific resistance to alkaline and acidic environment. However, it posses extraordinary thermal conductivity in annealed conditions. This grade of plates consists of excessive tensile energy and toughness.

Nickel alloy inconel 600 601 625 sheet and plate 1.5mm/2.0mm/5.0mm/8.0mm thkTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K500/R405,etcNitroni

Alloy 625 (UNS NO6625) is used in combustion system transition bushings, propeller blades, seals, fasteners, pumps, turbine rings, heat exchanger tubes, reaction vessels, distillation towers, heat exchangers and valves.Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)

Applications.Chemical industry involving phosphoric acid, sulfuric acid and nitric acid, nuclear fuel reprocessing, nuclear waste treatment, acid washing, petrochemicals, fertilizer manufacturing, pesticide manufacturing, gold extraction, etc. Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm

Outer diameter :10.3mm-406.4mm Wall thickness :1.24mm-40.49mmLength: usually fixed length 6m, according to customer requirementsProduct Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 etcMonel 400 / Monel K-500Inconel 600 / Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 /

Product Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 etcMonel 400 / Monel K-500Inconel 600/ Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 / Inconel X-750Incoloy A-286 / Incoloy 800 / Incoloy 800H / Incoloy 800HTIncoloy 825 / Incoloy 901 / Incoloy 925 / Incoloy 926Nimon

Incoloy 825 Pipe is used in tank trucks, calories, electrostatic precipitator electrodes, chemical process equipment, phosphoric acid evaporators, and sulfuric acid piping and vessels. Moreover, Alloy 825 Welded Pipe is also used in hot vessels for food and water, pickling tank heaters, pickling tanks, ammonium sulfate vessels, expansion bellows, and marine exhaust systems. Alloy 825 Clad Pipe manufactured by us are supplied to various industries in different countries.

The chemical composition of Monel400 alloy is mainly composed of 30%Cu and 65%Ni plus a small amount of Fe(1%-2%). The structure is typical monophasic austenite.

This kind of material with high formability, many is given priority to with brocade alloy are more likely to be welded.

304 Stainless Steel Pipe304 is an austenitic alloy, which is made up major constituents of nickel and chromium. The Stainless Steel 304 Pipe is designed with high corrosion and oxidation resistance properties. These alloys have excellent formation as well as welding properties.

Inconel 617 is known for its use in extreme environments, exhibiting high-temperature strength and oxidation resistance even at temperatures in excess of 1800 degrees Fahrenheit (980 degrees Celsius) as well as excellent corrosion resistance to a variety of corrosive environments. It is the unique properties of the Inconel617 that make it ideal for a wide range of components in the power generation, nuclear, petrochemical, food processing, aerospace, heat treatment and chemical industries.

Inconel 625 tubeInconel 625 tube is a nickel-chromium-molybdenum stable answer reinforced alloy with a nominal chemical composition of 61% nickel, 22% chromium, and 9% molybdenum. Inconel 625 tube is regularly referred to through the tradename Inconel 625 and the everyday designation UNS N06625.

It has good corrosion resistance in low and medium temperature hydrochloric acid.

When purchasing 304 stainless steel square bar, it is important to consider the desired dimensions, length, and quantity. It is also important to choose a reputable supplier or manufacturer to ensure the quality and reliability of the product.304 square stainless-steel bar is a metallic fabric with proper corrosion resistance, warm temperature resistance, low temperature electricity and mechanical homes.splendid pitting resistance and excessive temperature creep electricity.

Many industry will use 420 stainless steel rods, this kind of material with metallic luster, so choose the material production tools or equipment products, prominent on the appearance, the surface of the plate is very smooth, can also be customized according to the actual demand for processing, high plasticity, in the process of installation can tolerate acid and alkaline substances.Product Parameter：ProductStainless Steel BarBase materialstainless steel 200 series,300 series,400 seriesThickness0.40-5.00mmDiameter6-273mmstandardASTM A554/DIN/EN10296-2/JIS G3446,A269,A249,A270,EN10204 3.1Qualit

Inconel690/alloy690 primary application: mainly used in pressurized water reactor power station steam generator heat transfer tube data, is the skill of steam generator.TypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/

Application is very wide, below 980 ℃ has sufficient strength and corrosion resistance and oxidation resistance.1.Manufacture of springs and bolts working under high temperature; rotor blades, impellers and other structural parts of gas turbines;2. Thrust chamber on rocket engines;3. Thrust reversal device on aircraft;4.