Manufacturer-manufacture,factory,supplier from China

There are roughly five types of surfaces that can be used for stainless steel. They can be combined to produce more end products.The five species are:1. rolling surface processing2. mechanical surface processing3. chemical surface processing4. mesh surface processing and color surface processingThere are also some special surface treatments, but no matter which one is specified, theFollowing steps should be followed:1. Work with the manufacturer to agree on the required surface processing, it is better to prepare a sample as the future batch production standards.2.

Spec ChartsType 304Hot Rolled, Annealed and PickledThickness and WidthWeight Lbs. per Sq. Ft.Weight Lbs. per LengthLength3/16 x 488.579343.1610'1/4 x 4811.16357.128'1/4 x 4811.16446.4010'5/16 x 4813.75550.0010'3/8 x 4816.50660.0010'1/2 x 4821.63865.2010'5/8 x 4826.831,073.2010'3/4 x 4832.121,284.8010'1 x 4842.671,706.8010'1 1/2 x 4863.342,533.6010'

Stainless steel is initially by British scientists Henry cabral, doing research on the improvement of weapons found and the stainless steel in which the research has a strong dirt, acid resistance, corrosion resistance, wear resistance, no radioactive environmental products in developed some stainless steel products to pop up to now and slowly instead of the other material products.From material selection to molding, the stainless steel products cast by us have gone through 33 years of process processing. The surface technology adopts stainless steel primary color mirror polishing.

All steels have the same basic iron and carbon composition, but stainless steel also contains a healthy dose of chromium—the alloy that gives stainless steel its famous corrosion resistance.There are multiple grades called stainless steel, each with slightly different alloy composition, and therefore slightly different physical characteristics.Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.

All steels have the identical primary iron and carbon composition, however stainless-steel additionally includes a healthful dose of chromium—the alloy that offers stainless-steel its well-known corrosion resistance.There are a couple of grades known as stainless-steel, every with barely exclusive alloy composition, and consequently barely exclusive bodily characteristics.Stainless metallic need to comprise at the least 10.five percentage chromium.

On the basis of retaining the good decorative effect and durability of stainless steel material, the stainless steel composite plate overcomes the shortcomings of difficult processing and poor processing flatness, and has good sound insulation and heat insulation effect, which can be easily cut, bend, grooving, folding, drilling and other processing.▲ Vietnam VTB building stainless steel composite panel  ▲ A project in Shanghai stainless steel composite plate curtain wall

Stainless steel plate is a thick steel plate with a thickness of less than 4mm after further cold rolling according to the hot rolled steel of general carbon steel. Harm caused by material plate to steel coil manufacturing: one of the key elements in the design scheme of four roll rolling machine is material plate.The spot heating in stainless steel plate is mainly used to correct the convex and concave deformation of thick plate. The heat treatment method of stainless steel plate will soon be called flame correction.

Stainless steel panel to support system must be solid, smooth, and easy to change and to ensure that the stainless steel panel installation, hangs Taiwan in the form of design into small units in the form of structural system or by hooking, directly by molding bite or stainless steel plate buckles the connection of the way of implementation and the overall framework and fixed. Curtain wall stainless steel veneer commonly used support system is divided into: plate structure, buckle structure and box structure.

Pattern welding is a special way of constructing a sword blade from a lot of iron / steel parts. Many different kinds of iron / steel parts are fire welded in such a way that a pleasing pattern can be observed on one or both sides of a blade.

In the range of 25-300℃, with the increase of deformation temperature, the strength and elongation of the prepared materials decrease gradually in hot rolled, cold rolled and solid solution states. The reason may be that the rise of temperature, the increase of stacking fault energy and the change of deformation mechanism from twinning to slip. 4.210-4-6.