Magnetic-manufacture,factory,supplier from China

Type 301 is an austenitic chromium-nickel stainless steel that is available in the annealed and cold worked conditions. In the annealed condition, Type 301 offers the highest level of stretch formability of any stainless steel and in the heavily cold worked condition offers the highest strength level of any 300 series stainless steel. Type 301 is non-magnetic in the annealed condition but becomes magnetic as a result of cold working.Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.

316L Super Austenitic Stainless Steel316L Super Austenitic Stainless Steel  Scope of application:Corrosion resistance, atmospheric corrosion resistance and high temperature strength are particularly good, which can be used in harsh conditions; Excellent work hardening (non-magnetic).

Ha alloy, duplex stainless-steel 316 304 and different stainless steel substances, the sort of its commercial enterprise is steel plate, steel pipe, round steel, and so on., may be custom designed in keeping with patron name for processing.316 stainless steel, 18CR-12Ni-2.5Mo due to the addition of Mo, so its corrosion resistance, atmospheric corrosion resistance and high temperature strength is particularly good, can be used under harsh conditions; Excellent work hardening (no magnetic).

316L stainless steel hexagonal bar Features:1) Cold rolled products have good gloss and beautiful appearance;2) Excellent corrosion resistance, especially pitting corrosion resistance;3) Excellent high temperature strength4) Excellent work hardening (weak magnetic properties after machining)5) No magnetic properties in solid solution state;6) Compared with 304 stainless steel, the price is higher.3, application scope: pipeline, heat exchanger, food industry, chemical industry, etc.Product Parameter：StandardASTM A479,ASTM A276,ASTM A484, ASTM A582,ASME SA276, ASME SA484, GB/T1220, GB4226, etc.M

2507 dual-phase steel density: 8.03g/cm3, melting point: 1300-1390 ℃, magnetic: noneHeat treatment: heat preservation between 1000-1052℃ for 1-2 hours, rapid air cooling or water cooling.Mechanical properties: tensile strength: σb≥795Mpa, yield strength σb≥550Mpa: elongation: δ≥15%, hardness ≤310 (HB)Product Parameter：ItemStandardMaterialStainless SteelASTM201, 202, 301, 304, 304L, 304N, XM21, 304LN, 305, 309S, 310S, 316, 316Ti, 316L, 316N, 316LN, 317, 317L, 321, 347, 329,405, 409, 430, 434, 444, 403, 410, 420, 440A, etc.EN1.4372, 1.4373, 1.4319, 1.4301, 1.4306, 1.4315, 1.4303, 1.4833, 1.4845,

Stainless steel bar specification, materialMaterial :304, 304L, 321, 316, 316L, 310S, 630, 1Cr13, 2Cr13, 3Cr13, 1Cr17Ni2, duplex steel, antibacterial steel and other materials!304(18Cr-8Ni) material: as a widely used steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties; Stamping, bending and other thermal processing, no heat treatment hardening phenomenon (no magnetic, they use temperature -196℃~800℃).

ProductStainless Steel Sheet/Plate/CoilSurface FinishBA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, EmbossedTechniqueHot Rolled / Cold RolledStandardGB JIS ASTM ASME ENSteel Grade200 series: 201 202300 series: 301 304 304L 309 310 310s 316 316L 321400 series: 409 410 410S 420 430ColorStandard RAL color:red,bule,white,grey,brick,etc.Stock Dimension0.5mm-4mm x 1220mm/1500mm x 2440mm/2500mm;5mm-25mm x 1220mm/1500mm x 2440mm/2500mm/6000mm;8mm-80mm x 1500/1800/2000mm/2500 x 6000mm;cut to size according to customers' demandsServiceOEM, customized processing service, customized fabrication by drawingsProcessi

 Stainless Steel FlangeFeatures of stainless steel products1) High strength;2) Excellent machinability3) Hardening occurs after heat treatment;4) Magnetic;5) Not suitable for harsh corrosive environment.Scope of applicationGeneral blades, mechanical parts, bolts, nuts, Class 1 tableware (spoons, forks, knives, etc.).ItemDescriptionBasic InformationMaterial GradeWP304 , WP304L , WP304H , WP316 , WP316L , WP316Ti , WP309S , WP310S , WP321 , WP321H , WP347 , WP347H , F304 , F304L , F304H , F316 , F316L , F310S , F321 etcSize1/2" to 48" Sch 5S to XXSStandardASTM A403 etc .Proce

Type 201 Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. Type 201 is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked.

Stainless Steel 317 Square Bars & Rods have excellent yield strength and tensile strength, which is suitable for cold working and annealed condition appliance. It has nickel and low carbon content to provide high formability and excellent corrosion resistance to alkaline compounds. SS 317 Bars & Rods is austenitic stainless steel non-magnetic in nature, less conductivity to electricity, and less brittle at low temperature.

Austenitic stainless steel refers to stainless steel with an austenitic structure at room temperature. When the steel contains about 18% Cr, 8%-25% Ni, and about 0.1% C, it has a stable austenite structure. Austenitic chromium-nickel stainless steel includes the famous 18Cr-8Ni steel and the high Cr-Ni series steel developed by adding Cr and Ni content and adding Mo, Cu, Si, Nb, Ti and other elements on this basis. Austenitic stainless steel is non-magnetic and has high toughness and plasticity, but its strength is low. It is impossible to strengthen it through phase transformation.

Chinese 2Cr13 steel (20Cr13) is a martensitic stainless steel with magnetic properties, good corrosion resistance and high hardness in the quenched state.Product Parameter：NameStainless Steel angle barStandardASTM A276, A484, A479, A580, A582, JIS G4303, JIS G4311,DIN 1654- 5, DIN17440,GB/T 1220 ectMaterialMainly 201, 202, 304, 304L, 304H, 316, 316L,316Ti,2205, 330, 630, 660, 409L, 321, 310S, 410, 416, 410S, 430, 347H, 2Cr13, 3Cr13 et200series:201,202,202cu,204300series:301,302,303,304,304L,309,309s,310,310S,316,316L,316Ti, 317L,321,347400series:409,409L,410,420,430,431,439,440,441,444Others:2

Alloy Inconel 625 is a low-carbon nickel-chromium-molybdenum alloy with excellent breadability to various corrosive media, non-magnetic; good strength, toughness and excellent fatigue resistance in environments ranging from low temperatures to 1093°C (2000°F), thanks to the low carbon content and solid solution treatmentTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy:

201 Stainless Steel Square Bar,belongs to the chrome - nickel - manganese austenitic stainless steel, magnetic low 200 series stainless steel round bar .Application of 201 stainless steel square bars: oil and gas pipeline; chemical industry; plumProduct Parameter：StandardASTM A479,ASTM A276,ASTM A484, ASTM A582, ASME SA276, ASME SA484, GB/T1220, GB4226, etc.Material301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 310S, 201,202321, 329, 347, 347H 201, 202, 410, 420, 430,  S20100, S

Product Discription：ItemCold Rolled/Hot Rolled Stainless Steel Coil StandardJIS, AISI, ASTM, GB, DIN, EN, AISI, ASTM, DIN, EN, GB, JISMaterial201,304,316,316L,347H,309S,310S,904L,2205,2507,254SMO,ETCTypeCoil/Sheet/Plate/StripTechniqueHot Rolled/Cold RolledThickness0.3-100mmWidth600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcCertificationISO9001, SGS, BV, ISO, CESurfaceWe can provide!1 Reliable quality and competitive price2 Accept any third party test3 Professional sales team and reliable factory4 Customized desig

GH3128(GH128) Application field· Aero engine combustion chamber flame cylinder, afterburner shell and regulating plate· Structural components of gas turbine combustion chamber· Turbine engine combustion chamber components· Afterburner componentsGH4169 Application field· Main combustion chamber and afterburner of aviation engine· Welded structural parts of aeroengine· Engine mounting edge and conduit· Guide blade partsTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery

Application example: The exhaust valve of diesel engine for ship and tank is mainly made by Nimonic 80A forging. Nimonic 80A has high heat resistance, high strength at high temperature, large deformation resistance, increasing the difficulty of forging forming.

GH3039 is a single-phase Austenitic solid solution reinforced alloy with moderate thermal strength and good thermal fatigue properties below 800℃ and good oxidation resistance below 1000℃. Long-term use of stable structure, but also has good cold formability and welding performance. Suitable for aero engine combustion chamber and afterburner parts used for a long time below 850℃.

Corrosion resistance of Incoloy 800H:800H is resistant to many corrosive media. Its high nickel content gives it good resistance to stress corrosion cracking in aqueous corrosion conditions. The high chromium content gives it better resistance to pitting and crevice corrosion cracking. The alloy has good resistance to nitric and organic acid corrosion, but has limited resistance in sulfuric and hydrochloric acids. It has good resistance to corrosion in oxidizing and non-oxidizing salts, except for the possibility of pitting corrosion in halides.

Incoloy 925 precipitation strengtheningBy aging treatment, the second phase (γ', γ", carbide, etc.) is precipitated from the supersaturated solid solution to strengthen the alloy. γ' phase is the same as the matrix, which is face-centered cubic structure, with similar dotting constants to the matrix, and co-grid with the crystal, so the γ phase can be uniformly precipitated in the matrix in the form of fine particles, impeding dislocation movement, and producing significant strengthening effect.

The Incoloy 800HT is resistant to many corrosive media. Its high nickel content makes it have good resistance to stress corrosion cracking under water-based corrosion conditions. High chromium content makes it have better resistance to spot corrosion and crevice corrosion cracking. The alloy has good resistance to nitric acid and organic acid, but limited resistance to sulfuric acid and hydrochloric acid. Excellent corrosion resistance in oxidizing and non-oxidizing salts, except for the possibility of point corrosion in halides.

TypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K500/R405,etcNitronic 40/50/60/75/80A/90/A263 ;etcSpecificationWire: 0.01-10mm /Strip: 0.05*5.0-

Incoloy 926 nickel-based alloy application areas:1、Fire protection system, seawater purification system, hydraulic and perfusion piping system in marine engineering:2、Bleaching pool in cellulose pulp production;3、Polishing rods in corrosive oil wells:4、Hose system in marine engineering:5、Piping, joints, airflow system in acid gas production, etc;6、Components in flue gas desulfurization system;7、Evaporator, heat exchanger, filter, mixer, etc.

The chemical composition of Monel400 alloy is mainly composed of 30%Cu and 65%Ni plus a small amount of Fe(1%-2%). The structure is typical monophasic austenite.