inco 901-manufacture,factory,supplier from China

What is 2205 Stainless Steel?2205 stainless metal is a ferritic-austenitic grade composed of 22% chromium, 5% nickel, and 3-4% molybdenum. It has first-rate corrosion resistance in each freshwater and brackish water environments, making it an perfect desire for marine purposes such as boat fittings and anchors.

What is the difference between 2507 stainless steel plate and 2205 and 2206? 2507 stainless steel tube is a ferritic - austenitic (duplex) stainless steel, which combines many of the most beneficial properties of ferritic and austenitic steels. Due to the high content of chromium and molybdenum in the steel, it has excellent resistance to spot corrosion, gap corrosion and uniform corrosion.

Duplex chrome steel pipe product evaluation:Lean duplexWellknown duplexAwesome duplexHyper duplexClassified applications of duplex stainless steel pipe :Offshore oil and gasChemical system enterpriseChemical tankers / shipbuildingDesalination / water remedyPulp and paperAir pollutants manipulateArchitecturalConstructing and production

duplex (austenitic-ferritic) stainless steel characterized by:High resistance to stress corrosion cracking (SCC) in chloride-bearing environmentsHigh resistance to stress corrosion cracking (SCC) in environments containing hydrogen sulfideHigh resistance to general corrosion, pitting, and crevice corrosionHigh resistance to erosion corrosion and corrosion fatigueHigh mechanical strength - roughly twice the proof strength of austenitic stainless steelPhysical properties that offer design advantagesGood weldability

Duplex Stainless Steels are a specific group of engineering stainless steel materials consisting of the austenitic and ferritic phase in roughly equal proportions in the microstructure. They are widely popular because of their good corrosion resistance along with high strength and ease of fabrication. They are also popular by their acronym DSS.

It is often said that the phase balance of duplex stainless steels is "50-50", which corresponds to the amount of austenite and ferrite. Strictly speaking, this is not true, as the ferrite content in modern duplex stainless steels is around 40% - 50% and the rest is austenite.

1, Corrosion resistance, non-flammable, non-toxic and tasteless.  2, Good wear resistance, long service life, stainless steel perforated mesh wear resistance for ordinary sieve plate 3 to 5 times, for ordinary rubber sieve plate more than 5 times.  3, The total cost is low, although the same specification (area) of stainless steel perforated plate than ordinary sieve plate high one-time investment (about 2 times), but because the life of stainless steel perforated plate is 3 to 5 times the ordinary sieve plate, and less maintenance and replacement, so the total cost is not

Stainless steel is initially produced in slabs, which are then put through a conversion process using a Z mill, which converts the slab into coil prior to further rolling. These wide coils are typically made at around 1250mm (sometimes a little wider) and are known as 'mill edge coils'.These wide coils are further processed using a range of manufacturing techniques such as slitting, where the wide coil is slit into a multitude of strands; this is where much of the confusion around the terminology comes in.

The application of stainless steel coil is very extensive1.

Stainless steel rolls in accordance with the method of classification can be divided into cold rolling and hot rolling two, if it is in accordance with the structural characteristics of steel classification, can be divided into 4 categories, respectively, austenitic stainless steel, ferritic stainless steel, martensitic stainless steel and precipitation hardening stainless steel.Cold rolled stainless steel coil in order to ensure its yield strength, tensile strength, elongation and hardness and other mechanical properties, steel coil in the production of the need to undergo annealing and solut