GH3128 Nickel Base Alloy Plate-manufacture,factory,supplier from China

GH3128(GH128) Application field· Aero engine combustion chamber flame cylinder, afterburner shell and regulating plate· Structural components of gas turbine combustion chamber· Turbine engine combustion chamber components· Afterburner componentsGH4169 Application field· Main combustion chamber and afterburner of aviation engine· Welded structural parts of aeroengine· Engine mounting edge and conduit· Guide blade partsTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery

Nickel Base Alloy Plate It should be noted that active metals cannot be used in fluorine-containing environment (for example, Hastelloy C2000, NICU alloy, etc. can be used in hydrofluoric acid environment).Nickel Base Alloy is Active metals ,it also have good corrosion resistance, and the typical representative is Ti; Zr; TA et al; The most typical one is Ti; Titanium material has a wide range of applications, mainly used in some corrosion environments that stainless steel can not adapt to.

Application example: The exhaust valve of diesel engine for ship and tank is mainly made by Nimonic 80A forging. Nimonic 80A has high heat resistance, high strength at high temperature, large deformation resistance, increasing the difficulty of forging forming.

Chemical composition of Incoloy926 nickel base alloyThe content of Cr in nickel-based alloys is usually 14.0-18.0% and the content of nickel is 24.0-26.0%.

GH3039 is a single-phase Austenitic solid solution reinforced alloy with moderate thermal strength and good thermal fatigue properties below 800℃ and good oxidation resistance below 1000℃. Long-term use of stable structure, but also has good cold formability and welding performance. Suitable for aero engine combustion chamber and afterburner parts used for a long time below 850℃.

Manufacturer Alloy 330 Incoloy 330 nickel alloy sheet/plate/coilTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K500/R405,etcNitronic 40/50/60/7

GH3044 is a solid solution strengthened nickel-based anti-oxidant alloy with high plasticity and moderate thermal strength under 900℃, and has excellent oxidation resistance and good stamping and welding process performance. It is suitable for manufacturing the main combustion chamber and afterburner parts, heat shield and guide blade of aviation engines working under 900℃ for a long time.

Corrosion resistance of Incoloy 800H:800H is resistant to many corrosive media. Its high nickel content gives it good resistance to stress corrosion cracking in aqueous corrosion conditions. The high chromium content gives it better resistance to pitting and crevice corrosion cracking. The alloy has good resistance to nitric and organic acid corrosion, but has limited resistance in sulfuric and hydrochloric acids. It has good resistance to corrosion in oxidizing and non-oxidizing salts, except for the possibility of pitting corrosion in halides.

Incoloy 925 precipitation strengtheningBy aging treatment, the second phase (γ', γ", carbide, etc.) is precipitated from the supersaturated solid solution to strengthen the alloy. γ' phase is the same as the matrix, which is face-centered cubic structure, with similar dotting constants to the matrix, and co-grid with the crystal, so the γ phase can be uniformly precipitated in the matrix in the form of fine particles, impeding dislocation movement, and producing significant strengthening effect.

Alloy Inconel 625 is a low-carbon nickel-chromium-molybdenum alloy with excellent breadability to various corrosive media, non-magnetic; good strength, toughness and excellent fatigue resistance in environments ranging from low temperatures to 1093°C (2000°F), thanks to the low carbon content and solid solution treatmentTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy:

Nickel Base Alloy C276 are tremendous for warmth exchangers inside the chemical processing and nuclear industries. they’re used in steam generator tubing inside the nuclear energy industry, in excessive-temperature aircraft structures, and in oil and fuel extraction packages in which corrosion-, stress- and temperature-resistant tubing is needed.

Inconel 625 Nickel Base Alloy PipeInconel 625 demonstrates an extraordinary mixture of corrosion resistance and excessive strength. Due to the excessive nickel content, alloy 625 is immune to chloride-induced stress corrosion cracking. It additionally has appropriate resistance to pitting and crevice corrosion.

The Incoloy 800HT is resistant to many corrosive media. Its high nickel content makes it have good resistance to stress corrosion cracking under water-based corrosion conditions. High chromium content makes it have better resistance to spot corrosion and crevice corrosion cracking. The alloy has good resistance to nitric acid and organic acid, but limited resistance to sulfuric acid and hydrochloric acid. Excellent corrosion resistance in oxidizing and non-oxidizing salts, except for the possibility of point corrosion in halides.

Nickel alloy inconel 600 601 625 sheet and plate 1.5mm/2.0mm/5.0mm/8.0mm thkTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K500/R405,etcNitroni

904L Stainless Steel BarNickel base corrosion resistant alloys have austenite structure. In the state of solid solution and aging treatment, there are intermetallic phases and metal carbonitrides on the austenite matrix and grain boundary of the alloy.Ni Mo alloy is mainly used under the condition of reducing medium corrosion.

G-30 Nickel Base Alloy PipeHastelloy G30 Seamless Pipes is a corrosion resistant alloy of nickel – chromium – molybdenum that is particularly appropriate for use in oxidizing acids. Hastelloy G30 Seamless Tubes is a excessive Nickel primarily based alloy which suggests best corrosion resistance over most different Nickel and Iron based totally alloys in phosphoric acids as properly as many complicated environments containing incredibly oxidising acids such as nitric, hydrofluoric and sulphuric.

Incoloy 925 Nickel Base Alloy PipeThis is an age-hardenable Nickel primarily based alloy containing Iron and Chromium as primary additions, and additionally additions of Molybdenum, Copper, Titanium and Aluminum. A mixture of excessive electricity and corrosion resistance make it appropriate in functions such as valves, hangers, packers, and tubular, in bitter fuel environments. It can additionally be used for fasteners, and for pump shafts working inside marine environments.The mixture of Nickel and Chromium renders safety in each oxidizing and lowering atmospheres.

Incoloy 926 nickel-based alloy application areas:1、Fire protection system, seawater purification system, hydraulic and perfusion piping system in marine engineering:2、Bleaching pool in cellulose pulp production;3、Polishing rods in corrosive oil wells:4、Hose system in marine engineering:5、Piping, joints, airflow system in acid gas production, etc;6、Components in flue gas desulfurization system;7、Evaporator, heat exchanger, filter, mixer, etc.

TypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K500/R405,etcNitronic 40/50/60/75/80A/90/A263 ;etcSpecificationWire: 0.01-10mm /Strip: 0.05*5.0-

Inconel 600 Nickel Base Alloy PipeInconel 600 alloy is a nickel-chromium-iron-based strong answer bolstered alloy. It has accurate excessive temperature corrosion and oxidation resistance, extremely good bloodless and warm processing and welding properties, and has exceptional thermal energy and excessive plasticity under 700°C.Inconel 600 alloy can be reinforced with the aid of bloodless working, and it can also be related via resistance welding, soften welding or brazing.

Monel 400 PlateMonel 400 Plate is a copper-nickel base alloy plate. Along with these, it is traced with the quantity of manganese, silicon, and carbon content. These Monel 400 Plates have proper ductility and facilitate most suitable resistance to a extensive vary of corrosive circumstances. These plates show off terrific resistance to alkaline and acidic environment. However, it posses extraordinary thermal conductivity in annealed conditions. This grade of plates consists of excessive tensile energy and toughness.

C276 Nickel Base Alloy Bar          Hastelloy  C-276    CharacterThe key elements influencing corrosion resistance of this fabric are the control of impurity S,P, gascontent O,N and key factors C,Si, and so forth.It depends on the manage of manufacturing procedure, which include thepreference of heating temperature and heat maintenance time of forging, such as the assure of forgingratio, inclusive of the assure of strong answer remedy, and so on.Product Parameter：2.Chemical compositionCSMnPSNiCrMoFeCoWVMin14.515.04.03.0Max0.010.081.00.040.03Mar

Nickel - base corrosion - resistant alloys mostly have austenite structure.  There are intermetallic phases and metal carbonitrides in austenite matrix and grain boundary of alloy under solution and aging treatment.  Product Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 e

Inconel 825 Nickel Base Alloy BarThe excessive nickel content material of Incoloy 825 offers the alloy an fantastic resistance to stress corrosion cracking. The corrosion resistance is gorgeous in a range of media, such as sulfuric, phosphoric, nitric and natural acids, alkali metals such as sodium hydroxide, potassium hydroxide and hydrochloric acid solutions.