Customization-manufacture,factory,supplier from China

Stainless steel rolls in accordance with the method of classification can be divided into cold rolling and hot rolling two, if it is in accordance with the structural characteristics of steel classification, can be divided into 4 categories, respectively, austenitic stainless steel, ferritic stainless steel, martensitic stainless steel and precipitation hardening stainless steel.Cold rolled stainless steel coil in order to ensure its yield strength, tensile strength, elongation and hardness and other mechanical properties, steel coil in the production of the need to undergo annealing and solut

Seawater corrosion resistant materials, and widely used in Marine engineering. However, in practical engineering application, the stainless steel connection, especially the welding area, often appears various corrosion damage, resulting in a great loss. Therefore, in this paper, according to the characteristics of seawater corrosion of stainless steel, the seawater corrosion and anticorrosion mechanism of its weld site were comprehensively analyzed and studied.

In most cases, there is no clear distinction between food grade and sanitary grade products. Generally (not necessarily) one of the requirements can be met, and the other can be met. The reason why it is divided into food grade and sanitary grade is that the direction of certification (standard source) is different.

Stainless steel is initially produced in slabs, which are then put through a conversion process using a Z mill, which converts the slab into coil prior to further rolling. These wide coils are typically made at around 1250mm (sometimes a little wider) and are known as 'mill edge coils'.These wide coils are further processed using a range of manufacturing techniques such as slitting, where the wide coil is slit into a multitude of strands; this is where much of the confusion around the terminology comes in.

Stainless steel is initially produced in slabs, which are then put through a conversion process using a Z mill, which converts the slab into coil prior to further rolling. These wide coils are typically made at around 1250mm (sometimes a little wider) and are known as 'mill edge coils'.These wide coils are further processed using a range of manufacturing techniques such as slitting, where the wide coil is slit into a multitude of strands; this is where much of the confusion around the terminology comes in.

The application of stainless steel coil is very extensive1.

The appearance of the stamping elbow is fixed. Of course, the appearance of the general stamping elbow is based on the different knowledge of the steel pipe. Therefore, in order to ensure the appearance of the stamping elbow, usually after the steel pipe comes in , If it has not been washed by the rain in the yard, then the stamping elbow is pushed by high temperature, and the appearance of the stamping elbow is generally blue. Of course, if it is washed by the rain, we are heating it through high temperature. , the surface color of the heated stamping elbow is red.

For those applications with the need for superior corrosion resistance, Fehr's extensive Stainless Steel product line and substantial inventories are there to meet your needs. Choose Type 316 Stainless or the more economical Type 304 Stainless cable, chain and rigging hardware items for your next project.

The oxide film on the surface of stainless steel square tube is thin and dense, which is not easy to fall off. Mechanical cleaning is a common and effective means of stainless steel surface treatment. The iron oxide scale cleaning machine is mainly composed of steel brush roller, driving device, high-pressure water system, cooling water system and clamping device.Some preparations need to be done before welding of stainless steel square tube, which can improve the quality and efficiency of tubeline welding and the safety measures of welding workers.

Stainless steel surface treatment methods can be roughly divided into five categories, respectively, rolling surface processing, mechanical surface processing, chemical surface processing, reticulated surface processing, color surface processing. Formed products often mirror, drawing, reticulation, etching, electrolytic coloring, coating coloring, etc.