Bright Stainless Steel Coil, 0.1-0.5mm-manufacture,factory,supplier from China

Stainless steel is initially produced in slabs, which are then put through a conversion process using a Z mill, which converts the slab into coil prior to further rolling. These wide coils are typically made at around 1250mm (sometimes a little wider) and are known as 'mill edge coils'.These wide coils are further processed using a range of manufacturing techniques such as slitting, where the wide coil is slit into a multitude of strands; this is where much of the confusion around the terminology comes in.

Stainless steel is initially produced in slabs, which are then put through a conversion process using a Z mill, which converts the slab into coil prior to further rolling. These wide coils are typically made at around 1250mm (sometimes a little wider) and are known as 'mill edge coils'.These wide coils are further processed using a range of manufacturing techniques such as slitting, where the wide coil is slit into a multitude of strands; this is where much of the confusion around the terminology comes in.

From the analysis of stainless steel coil application industry, the automotive industry is currently the fastest developing stainless steel coil application field.In the past decade, consumption of stainless steel coil plates for cars has risen from an average of 10kg to 30kg in Japan and more than 40kg in the US.Bus, subway, high-speed railway vehicles and other public transportation tools are also widely used in stainless steel coil plate.China's home appliance industry is a potential large market for the application of stainless steel coil.In addition, stainless steel coil in the water

Corrosion resistanceInternational corrosion resistance of materials according to the annual corrosion rate is divided into three categories, the first category for complete corrosion resistance, the corrosion rate is less than 0.1mm / year, high-quality stainless steel belongs to such materials; the second category for still corrosion resistance, the corrosion rate of 0.1-1.0mm / year, belongs to the general stainless steel; the third category for corrosion resistance, the corrosion rate is greater than 1.0mm per year.Cold rolled descriptionCold rolled: Hot rolled coil is used as raw material,

Mesh surface processingStainless steel can be used in many kinds of patterns. The advantages of making steel plates with textured or textured surfaces are as follows:1) Reducing the "oil can-ning" of metallic roofing materials, a term used to describe the surface of a bright material that is not smooth from an optical point of view.

Surface Treatment  Surface FinishDefination2BThose finished,after cold rolling,by heat treatment,picking or other equivalent treatment and lastly by cold rolling to givenappropriate lusterBAThose processed with bright heat treatment after cold rollingNo.1The surface finished by heat treatment and picking or processes corresponding there to after hot rollingNo.4Those finished by polishing with No.150 to No.180 abrasives specified in JIS R 6001HLThose finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size8KA mirror-like reflective surface

How to identify the quality of stainless steel sinks?1. Thickness of water tank steel plate: The high-quality water tank adopts imported 304 stainless steel plate with a thickness of 1mm, while the ordinary low-grade water tank adopts 0.5mm-0.7mm. The method of identification can be determined from the weight and whether the surface is flat.2. Anti-noise treatment: The bottom of the high-quality sink is sprayed or glued with rubber sheets and does not fall off, which can reduce the sound caused by the impact of the water from the faucet on the bottom of the basin, and play a buffering role.3.

The application of stainless steel coil is very extensive1.

Stainless Steel Coils are one of the most sought after types of raw material in the construction and manufacturing industries. Thanks to their distinct mechanical and physical properties, stainless steel coils have been widely used in the production of kitchen appliances to industrial equipment. They are strong, resist corrosion, are light in weight and require low maintenance. Also, they are flexible and easily meet the requirements of a range of design criteria.

904L (N08904,14539) super austenitic stainless steel contains 24.0-26.0% nickel, 4.5% molybdenum. 904L super austenitic stainless steel is a low carbon, high nickel, molybdenum austenitic stainless steel, which is a special material introduced from H·S Company in France. It has good activation-passivation transformation ability and excellent corrosion resistance. It has good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid and phosphoric acid.