Bonding-manufacture,factory,supplier from China

How to identify the quality of stainless steel sinks?1. Thickness of water tank steel plate: The high-quality water tank adopts imported 304 stainless steel plate with a thickness of 1mm, while the ordinary low-grade water tank adopts 0.5mm-0.7mm. The method of identification can be determined from the weight and whether the surface is flat.2. Anti-noise treatment: The bottom of the high-quality sink is sprayed or glued with rubber sheets and does not fall off, which can reduce the sound caused by the impact of the water from the faucet on the bottom of the basin, and play a buffering role.3.

Stainless steel and titanium are traditional metals that are used very often in the manufacturing sector. Both the traditional metals have a unique set of strength and properties and are exquisite in their characteristics. You need to have proper knowledge about titanium and stainless steel to help you achieve your objectives in your projects. The following is a comprehensive guide to distinguishing between the two metals. Stainless steel and titanium exhibit some unique characteristics that differentiate these metals.

What is Stainless Steel?Iron is a very soft element. By adding up to 2% of carbon to it, incredible strength, hardness and mechanical properties are obtained, which is now called steel. The use of steel is also very common due to the abundance of iron and its easy and cheap availability. But steel also has a weak spot, which is in iron. Rusting, in other words oxidation. Rusting is an oxidation.Oxidation is the combination of an element with oxygen. As a result of the combination of all elements in nature with oxygen, corrosion occurs on the surface of the element.

Carbon metallicCarbon metallic is primarily based on positive standards, which, if observed, might come below the carbon metal category. the few factors or the requirements to be stored in mind earlier than classifying into the identical are-There may be no specification of the minimal content material required for certain things like- nickel, titanium, cobalt, chromium, molybdenum, etc.

Seawater corrosion resistant materials, and widely used in Marine engineering. However, in practical engineering application, the stainless steel connection, especially the welding area, often appears various corrosion damage, resulting in a great loss. Therefore, in this paper, according to the characteristics of seawater corrosion of stainless steel, the seawater corrosion and anticorrosion mechanism of its weld site were comprehensively analyzed and studied.

In most cases, there is no clear distinction between food grade and sanitary grade products. Generally (not necessarily) one of the requirements can be met, and the other can be met. The reason why it is divided into food grade and sanitary grade is that the direction of certification (standard source) is different.

1. Comparison of copper pipe and stainless steel pipeNow from the material's physical performance, health performance, corrosion resistance, economic value and other aspects of comparison.1. Comparison of physical propertiesComparison of tensile strength:Take the commonly used 304 material of thin-wall stainless steel pipe as an example, its tensile strength is 530 ~ 750Mpa, is galvanized pipe 2 times, copper pipe 3 times.

Implementation principleThreaded flange is a kind of non-welded flange, which processes the inner hole of the flange into pipe threads, and is matched with the threaded pipe to realize the connection. Compared with the flat welding flange or the butt welding flange, the threaded flange has the characteristics of convenient installation and maintenance, and can be used on some pipelines where welding is not allowed. Alloy steel flanges have sufficient strength, but are not easy to weld, or the welding performance is not good, and threaded flanges can also be selected.

What is the difference between 2507 stainless steel plate and 2205 and 2206? 2507 stainless steel tube is a ferritic - austenitic (duplex) stainless steel, which combines many of the most beneficial properties of ferritic and austenitic steels. Due to the high content of chromium and molybdenum in the steel, it has excellent resistance to spot corrosion, gap corrosion and uniform corrosion.

Why doesn't stainless steel rustBecause of the addition of 12.5% chromium in stainless steel composition, it can make stainless steel surface generated a layer of passivation film, prevent the metal matrix is destroyed, enhance corrosion resistance, so the surface will not rust.