ASTM A182 F316L Stainless Steel Flange-manufacture,factory,supplier from China

Implementation principleThreaded flange is a kind of non-welded flange, which processes the inner hole of the flange into pipe threads, and is matched with the threaded pipe to realize the connection. Compared with the flat welding flange or the butt welding flange, the threaded flange has the characteristics of convenient installation and maintenance, and can be used on some pipelines where welding is not allowed. Alloy steel flanges have sufficient strength, but are not easy to weld, or the welding performance is not good, and threaded flanges can also be selected.

Types of Socket Weld FlangesSocket Weld Raised Face FlangeRaised Faced Socket weld Flanges4 Bolt Socket Weld flange300# Socket Weld FlangeANSI B16.5 Socket weld FlangesSocket weld Flange DimensionsASME B16.5 SWRF FlangesANSI B16.5 Class 150 Socket weld FlangesStainless Steel Socket weld Flanges Suppliers1 inch Socket weld FlangeSocket weld Ring Type Joint FlangesASME B16.47 Series A and B SWRF Flanges2 inch Socket weld Flange3 inch Socket weld FlangeANSI B16.5 class 150 SWRF Flange StockholderANSI 150 Socket weld Flange4 inch Socket weld FlangeHigh Quality SWRF FlangesFlat Face SWRF Flange6 in

Loose flange: This kind of flange is often used in the case where the medium temperature and pressure are not high and the medium nozzle is highly corrosive. The loose flange is generally used in combination with the flanging short joint, that is, the flange ring is loosely sleeved outside the flanging short joint, the pipe is butt welded with the flanging short joint, and the flange sealing surface is processed on the flanging short joint.In addition, there are flat welding ring and butt welding ring plate loose flange.

Structural features:Threaded flanges manufactured in accordance with ASME B16.5 are similar to sliding flanges, but the holes shall have tapered pipe threads in accordance with ASME b1.20.1. The thread shall be concentric with the axis of the flange opening, and the alignment deviation (perpendicular to the flange face) shall not exceed 5mm per meter. Threaded flanges are NPs 1 / 2 to NPs 24 in size and pressure classes are 150, 300, 400, 600 and 900. The sizes of class 1500 and 2500 are NPs 1 / 2 to NPs 2 - 1 / 2.Class 150 threaded flange has no counterbore.

Unit Length6 m, 12 mUnit Pipe Length3 meter, 6 meter, 9 meter, 18 meter, 12 meterSize0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, > 4 inch, Upto 24Material GradeA 106FeaturesAnealedAlloy Or NotIss AlloyCertificationAPISteel GradeA 106ColorBlackMinimum Order Quantity50 KilogramProduct DescriptionTypes of Steel PipesCARBON STEEL PIPES: Seamless/ERW Pipes - A 106 Gr.B, API 5L GR.B, ASTM A210 A1, SA 179 ETC.Specifications / FeaturesASME specifies a set of Alloy Steel pipe specifications which can be welded - Welding rod Specification is : E.8018.Standard pipe schedules are available like&n

Producing fluid system components that meet all aspects of NACE MR0175/ISO 15156 requires the use of high-quality raw materials, careful testing, and careful selection of manufacturing methods. Alloys must undergo a controlled solution annealing process, and their microstructural quality must be assessed by tests such as ASTM A262, which detects intergranular corrosion in austenitic stainless steels, or ASTM A923, which certifies that duplex stainless steels are free from harmful the intermetallic phase.

AISI 410 Stainless Steel, SS410 (UNS S41000)AISI 410 stainless steel is one of the most commonly used martensitic stainless steels. It contains about 12% Cr and therefore provides moderate corrosion resistance. Unlike austenite such as AISI 304 and AISI 316, martensite such as grade 410 is magnetic and can be hardened by heat treatment like carbon steel and low alloy steel.

STOCK SIZE RANGE AND SPECIFICATIONS:WELDED PRODUCTSEAMLESS PRODUCTNPS: 1/8” through 24”NPS: 1/8” through 8”Schedules: 5, 10S, 10, 30, 40S, 40, 80, 80SSchedules: 10, 40, 80, 160, XXHSpecifications: ASTM A312, ASME SA312Specifications: ASTM A312,ASME SA312Corrosion tested to MIL-P-24691/3 or A262 Practice ETypical Chemical Composition % (max values, unless noted)Weight %CMnPSSiCrNiMo316.082.00.045.0301.0016.0-18.011.0-14.02.0-3.0316L.0352.00.045.0301.0016.0-18.010.0-14.02.0-3.0Typical Mechanical PropertiesGradeTensile Ultimate/MinYield/MinElongation/MinKSIMPAKS

Specification of Stainless Steel Sheets, Plates & Coils Specifications : ASTM A240 / ASME SA240Thickness : 0.1mm to 12 mm ThkSheet/Plate Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm.Coil Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc.Coil Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc.Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching.Finish : Hot rolled (HR), Cold rolled (CR), SATIN (Met with Plasti

JIS AiSi ASTM 304 304l 16 gauge seamless welding round square ss pipe tube stainless steel pipeDescriptionItemRound aisi tube prices 201 304 304l 316 stainless steel pipe/tubeSteel grade300 seriesStandardASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456, DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216, BS3605,GB13296Material304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201,202SurfacePolishing,annealing,pickling,brightTypehot rolled and cold rolledstainless steel round pipe/tubeSizeWall thickness1mm-150mm(SCH10-XXS)Outer diameter6mm-2500mm (3/8"-100")