alloy pipe-manufacture,factory,supplier from China

The elbow is a pipe fititng for bends in the pipeline . It represents the largest proportion, about 80% among all the pipe fittings used in the pipeline system. Usually, select different forming process for the elbows with different materials or wall thickness. At present,forming processes for seamless elbows commonly used by manufacturing plants are stamping,thrust,extrusion etc.. Classifications of Elbows:1 .Classified as materials: carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, PVC, PPR etc..2.

The Stainless Steel 904L Pipe & Tube is one great austenitic stainless steel alloy which is renowned for its amazing corrosion resistant properties. Moreover, it features some low carbon, and thus, it is the updated version of the same 904 range. It offers numerous benefits to the users; therefore, it is seen applied in various industries.

Incoloy 825 Pipe is used in tank trucks, calories, electrostatic precipitator electrodes, chemical process equipment, phosphoric acid evaporators, and sulfuric acid piping and vessels. Moreover, Alloy 825 Welded Pipe is also used in hot vessels for food and water, pickling tank heaters, pickling tanks, ammonium sulfate vessels, expansion bellows, and marine exhaust systems. Alloy 825 Clad Pipe manufactured by us are supplied to various industries in different countries.

Monel 400 PipeMonel 400 Pipe belongs to the copper-nickel corrosion-resistant alloy, which is the corrosion-resistant alloy with the greatest consumption, the most versatile and extremely good complete performance. Monel 400 Pipe has fantastic corrosion resistance in hydrofluoric acid and fluorine fuel medium, and additionally has exquisite corrosion resistance to warm focused lye. At the equal time, Monel 400 Pipe is resistant to corrosion from impartial solutions, water, sea water, air, natural compounds, etc.

Pipe flanges connect pipes, valves, pumps and other equipment in a piping system. Flanges are usually welded or screwed into the systems and then joined with bolts. The eight types of pipe flanges are available in round, square and rectangular shapes.Blind FlangesA blind, or blanking, flange is a round plate with no center hold (but with bolt holes) that closes the ends of piping systems.Lap Joint FlangesPiping fitted with lapped pipe or with lap joint stub ends often use lap joint flanges.

This kind of material with high formability, many is given priority to with brocade alloy are more likely to be welded.

304 Stainless Steel Pipe304 is an austenitic alloy, which is made up major constituents of nickel and chromium. The Stainless Steel 304 Pipe is designed with high corrosion and oxidation resistance properties. These alloys have excellent formation as well as welding properties.

introduction:Welded stainless steel pipe provides us a large diameter but low cost solution. Our welding process mainly is Plasma-Arc Welding(PAW), its biggest diameter could reach 3000mm. If other process is required, please state it in the requirement of stainless steel tubings.Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface.

Incoloy Alloy A-286 is readily fabricated by standard procedures for stainless steel and alloys.

Hastelloy C-2000, named UNS N06200, is a nickel-chromium-molybdenum alloy. Adding a certain amount of copper to sulfuric acid, hydrofluoric acid and dilute hydrochloric acid can improve its temperature resistance. The high chromium content enables maximum resistance to oxidation chemicals and process flows contaminated by iron ions and dissolved oxygen. The alloy has excellent resistance to chloride and corrosion.

Incoloy 800H Nickel Base Alloy Pipe Application：National defense, astronautics, transportation, equipment manufacture, shipping, petroleum, nuclear power industry, oil and gas industry, and chemical industry etc.Product Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 etcMonel 400 / Monel K-500

Inconel 617 Pipe & other nickel based alloys from these ranges are ideal for cost-effective manufacture of pumps, valves and process control equipment in oil and gas extraction.Product Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 etcMonel 400 / Monel K-500Inconel 600 / Inconel 601 / Inc

Stamping elbow is a kind of connecting pipe commonly used in pipeline installation.

Incoloy 825 Nickel Base Alloy Pipe the organism is mainly used in heat treatment equipment, resistance alloy tube type heater and covering device, chemical such as petroleum processing equipment.Product Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 etcMonel 400 / Monel K-500Inconel

This kind of steel pipe can be divided into stainless steel seamless steel pipe and stainless steel welded pipe (seam pipe) two categories.According to the different manufacturing process can be: hot rolling, extrusion, cold drawing and cold rolling these basic types, according to the shape of the section and can be divided into round pipe and special-shaped pipe, widely used is circular steel pipe, but there are some square, rectangular, semicircular, hexagonal, equilateral triangle, octagonal special-shaped stainless steel pipe.Shaped Stainless Steel Pipe1.Not easily rust, acid resistance an

Outer diameter :10.3mm-406.4mm Wall thickness :1.24mm-40.49mmLength: usually fixed length 6m, according to customer requirementsProduct Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 etcMonel 400 / Monel K-500Inconel 600 / Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 /

Nickel - base corrosion - resistant alloys mostly have austenite structure.  There are intermetallic phases and metal carbonitrides in austenite matrix and grain boundary of alloy under solution and aging treatment.  Product Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 e

Alloy 400 from NeoNickel has superb corrosion resistance, particularly in neutral and alkaline salts. It is also one of a limited number of alloys that can be used in conjunction with hydrofluoric acid and fluorine. With high nickel content, this alloy is immune to chloride-induced stress corrosion cracking.

TP310s seamless/welded stainless steel pipe/tube for Instrumentation Stainless steel pipe is a kind of hollow long round steel, which is widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transmission pipelines as well as mechanical structural components. In addition, when the bending and torsional strength are the same, the weight is light, so it is also widely used to manufacture mechanical parts and engineering structures.

Nickel Alloy Incoloy 800HT PipeIncoloy 800 HT is composed of more aluminum and titanium. This gives 800 HT even greater resistance to high temperatures. Incoloy 800 HT is recommended for temperatures exceeding 1100° F, often in instances where stainless steels are subject to crack and creep. The Incoloy alloys are commonly used in high temperature environments, such as industrial furnaces, chemical and nuclear vessels, and heat-treating equipment.

The Incoloy 901 Nickel Base Alloy Pipe content makes it have better oxidation resistance than standard 18-8 stainless steel, and its oxidation resistance is no less than that of higher grade alloys with temperatures up to 1900 ° f (1038 ° c).1. Fire control system, seawater purification system, hydraulic pressure and perfusion piping system in ocean engineering.2, cellulose pulp production in the bleaching pool.3. Polished rods in corrosive oil Wells.4. Hose system in ocean engineering.5. Pipelines, joints and airflow systems in acid gas production.6.

Product Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 etcMonel 400 / Monel K-500Inconel 600/ Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 / Inconel X-750Incoloy A-286 / Incoloy 800 / Incoloy 800H / Incoloy 800HTIncoloy 825 / Incoloy 901 / Incoloy 925 / Incoloy 926Nimon

Stainless steel pipe are light weight and are widely used in the manufacture of mechanical parts and engineering structures.