904L Rolled Stainless Steel Coil-manufacture,factory,supplier from China

904L (N08904,14539) super austenitic stainless steel contains 24.0-26.0% nickel, 4.5% molybdenum. 904L super austenitic stainless steel is a low carbon, high nickel, molybdenum austenitic stainless steel, which is a special material introduced from H·S Company in France. It has good activation-passivation transformation ability and excellent corrosion resistance. It has good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid and phosphoric acid.

The difference between cold-rolled steel and hot-rolled steel is not in the smelting process, but in the rolling temperature, or the end temperature of rolling. When the final rolling temperature is lower than the recrystallization temperature of the steel, it is called cold rolled steel. Hot-rolled steel is easy to roll and has high rolling efficiency, but under hot-rolled conditions, the steel is oxidized, and the surface of the product is gray and dark.

Stainless steel is initially produced in slabs, which are then put through a conversion process using a Z mill, which converts the slab into coil prior to further rolling. These wide coils are typically made at around 1250mm (sometimes a little wider) and are known as 'mill edge coils'.These wide coils are further processed using a range of manufacturing techniques such as slitting, where the wide coil is slit into a multitude of strands; this is where much of the confusion around the terminology comes in.

Super Austenitic 904L stainless steel tubes are designed for corrosive environments. By optimizing chemical composition, super austenitic 904L stainless steel tube is a super austenitic stainless steel with low C content and high alloying. 904L super austenitic stainless steel tube blank was successfully developed by specific production process.

Stainless steel is initially produced in slabs, which are then put through a conversion process using a Z mill, which converts the slab into coil prior to further rolling. These wide coils are typically made at around 1250mm (sometimes a little wider) and are known as 'mill edge coils'.These wide coils are further processed using a range of manufacturing techniques such as slitting, where the wide coil is slit into a multitude of strands; this is where much of the confusion around the terminology comes in.

From the analysis of stainless steel coil application industry, the automotive industry is currently the fastest developing stainless steel coil application field.In the past decade, consumption of stainless steel coil plates for cars has risen from an average of 10kg to 30kg in Japan and more than 40kg in the US.Bus, subway, high-speed railway vehicles and other public transportation tools are also widely used in stainless steel coil plate.China's home appliance industry is a potential large market for the application of stainless steel coil.In addition, stainless steel coil in the water

Stainless steel rolls in accordance with the method of classification can be divided into cold rolling and hot rolling two, if it is in accordance with the structural characteristics of steel classification, can be divided into 4 categories, respectively, austenitic stainless steel, ferritic stainless steel, martensitic stainless steel and precipitation hardening stainless steel.Cold rolled stainless steel coil in order to ensure its yield strength, tensile strength, elongation and hardness and other mechanical properties, steel coil in the production of the need to undergo annealing and solut

Corrosion resistanceInternational corrosion resistance of materials according to the annual corrosion rate is divided into three categories, the first category for complete corrosion resistance, the corrosion rate is less than 0.1mm / year, high-quality stainless steel belongs to such materials; the second category for still corrosion resistance, the corrosion rate of 0.1-1.0mm / year, belongs to the general stainless steel; the third category for corrosion resistance, the corrosion rate is greater than 1.0mm per year.Cold rolled descriptionCold rolled: Hot rolled coil is used as raw material,

904L stainless steel plate is widely used and has good corrosion resistance, heat resistance, low temperature strength and mechanical properties; good hot workability such as stamping and bending, no heat treatment hardening phenomenon. Widely used in household items (1, 2 tableware), cabinets, indoor pipelines, water heaters, boilers, bathtubs, auto parts, medical equipment, building materials, chemicals, food industry, agriculture, ship parts.The 904L pattern stainless steel plate has added anti-slip function on the basis of the original performance.

Hot Rolled Stainless Steel, also known as inox steel, is a steel alloy with a minimum of 10.5 or 11% chromium content by mass. Hot Rolled Stainless steel Plate ...Material Supply:ASTM/ASMEGradeEN GradeChemical Component %CCrNiMnPSMoSiCuNOther201≤0.1516.00-18.003.50-5.505.50－7.50≤0.060≤0.030-≤1.00-≤0.25-3011.4310≤0.1516.00-18.006.00-8.00≤2.00≤0.045≤0.030-≤1.00-0.1-3041.4301≤0.0818.00-20.008.00-10.00≤2.00≤0.045≤0.030-≤0.75---304L1.4307≤0.03018.00-20.008.00-10.00≤2.00≤0.045≤0.030-≤0.75---304H1.49480.04~0.1018.00-20.008.00-10.00≤2.00≤0.045≤0.030-≤0.75---309S1.4828≤0.0822.00-24.0012.00-15