Español
العربية
Русский
Français
Type 301 is an austenitic chromium-nickel stainless steel that is available in the annealed and cold worked conditions. In the annealed condition, Type 301 offers the highest level of stretch formability of any stainless steel and in the heavily cold worked condition offers the highest strength level of any 300 series stainless steel. Type 301 is non-magnetic in the annealed condition but becomes magnetic as a result of cold working.Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.
Contact Now
Type 301 is a chromium nickel austenitic stainless steel capable of attaining high strengths and ductility by cold working. It is not hardenable by heat ...Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.
Contact Now
301 stainless steel strip is a kind of metastable austenitic stainless steel, which has a completely austenitic structure under the condition of full solution. Among the stainless steels, 301 is the steel that is most easily strengthened by cold deformation. Cold deformation can increase the strength and hardness of the steel and retain sufficient plasticity and toughness. In addition, this steel has good rust resistance under atmospheric conditions.
Contact Now
Stainless steel grade 301 is a commonly available austenitic stainless with good corrosion resistance and elevated carbon to allow for cold working to a variety of tempers.
Contact Now
Our 301 Stainless Steel Welded Pipes are made of 301 stainless steel, which can exert strong anti-corrosion properties in air or chemically corrosive media, and are often used in production, chemical equipment and other fields. They have a smooth surface and good corrosion resistance, which is not caused by surface treatment such as electroplating, but takes advantage of the inherent surface properties of stainless steel.
Contact Now
301 Stainless Steel Coil301 stainless metal coil is a kind of hardenable austenitic stainless metal with excessive strength, reasonable corrosion resistance and correct formability.
Contact Now
Stainless steel pipe and fittings are supplied in the annealed condition to facilitate fabrication and ensure best corrosion resistance.
Contact Now
Type 201 Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. Type 201 is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked.
Contact Now
304 304L Stainless Steel304 is a variation of the basic 18-8 grade, Type 302, with a higher chromium and lower carbon content. Lower carbon minimizes chromium carbide precipitation due to welding and its susceptibility to intergranular corrosion. In many instances, it can be used in the ”as-welded“ condition, while Type 302 must be annealed in order to retain adequate corrosion resistance. Type 304L is an extra low-carbon variation of Type 304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding.
Contact Now
ProductStainless Steel Sheet/Plate/CoilSurface FinishBA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, EmbossedTechniqueHot Rolled / Cold RolledStandardGB JIS ASTM ASME ENSteel Grade200 series: 201 202300 series: 301 304 304L 309 310 310s 316 316L 321400 series: 409 410 410S 420 430ColorStandard RAL color:red,bule,white,grey,brick,etc.Stock Dimension0.5mm-4mm x 1220mm/1500mm x 2440mm/2500mm;5mm-25mm x 1220mm/1500mm x 2440mm/2500mm/6000mm;8mm-80mm x 1500/1800/2000mm/2500 x 6000mm;cut to size according to customers' demandsServiceOEM, customized processing service, customized fabrication by drawingsProcessi
Contact Now
Stainless steel 301 Square Bar include 17% chromium and 7% nickel, which give excessive tensile strength as much as 1800mpa. these ss 301 bars are in particular used in plane, rail vehicle additives, and architectural structures.
Contact Now
304 304L Stainless Steel304 is a variation of the basic 18-8 grade, Type 302, with a higher chromium and lower carbon content. Lower carbon minimizes chromium carbide precipitation due to welding and its susceptibility to intergranular corrosion. In many instances, it can be used in the ”as-welded“ condition, while Type 302 must be annealed in order to retain adequate corrosion resistance. Type 304L is an extra low-carbon variation of Type 304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding.
Contact Now
301 Antioxidant Stainless Steel Welded H-beam High Quality Stock China FactoryStainless steel H-shaped steel, with a thickness of 4.0mm-8.0mm, is widely used in beams and columns of industrial and civil construction steel structures. Steel structure load-bearing support for industrial structures. Ship and machinery manufacturing frame structure.
Contact Now
Products Description1, Health type, fully meet the requirements of food grade standards 2, High temperature resistance, the maximum temperature of 1250 degrees. 3,Not afraid of wet, not afraid of water, can be soaked in water, completely deformed, do not rust. Product Namel stainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial200 series: 201/202300 series: 301/304/304L/305/309S/310S/316/316L/316LN/316Ti/317/317L/347/347H400 serie
Contact Now
Products DescriptionStainless steel plate is a type of hollow segment without a seams around.the thicker the thickness of the product, chrome steel plate is extra low cost and practical, the thinner the wall thickness, stainless-steel plate's processing charges will upward push significantly. Product Namel stainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial200 series: 201/202300 series: 301/304/304L/305/309S/310S/316/316L/316LN
Contact Now
In our extensive line of products, we offer stainless steel sheet and stainless steel plates.WHAT IS STAINLESS STEEL SHEET?Stainless steel sheet is typically sold in the annealed condition and is available in most grades. Our stainless steel sheets come in both a standard 2B finish and various polished finishes. Polished surfaces range from the standard #4 to a mirrored finish #8 and are usually covered with a removable vinyl coating. Our standard sheet sizes include 4’ x 8’, 4’ x 10’, and 5’ x 10’, but customized sizes are also available.
Contact Now
Product SpecificationThickness/Diameter>4 inchSingle Piece Length3 meter, 6 meterMaterialStainless SteelShapeRoundDiameter6 to 400 mmLength1 ~ 8 metersProduct DescriptionWe stock Bar, Hexagon, Square, Round products in various dimensions and grades. We stock Stainless steels supplied in the as rolled, annealed and normalized conditions.
Contact Now
Stainless steel belt more types, uses are :201 stainless steel belt, 202 stainless steel belt, 304 stainless steel belt, 301 stainless steel belt, 302 stainless steel belt, 303 stainless steel belt, 316 stainless steel belt, J4 stainless steel belt, 309S stainless steel belt, 316L stainless steel belt, 317L stainless steel belt, 310S stainless steel belt, 430 stainless steel iron belt, etc.
Contact Now
316L Stainless steel channelThe main purpose of hot-rolled stainless steel common channel steel: common channel steel is mainly used in building structures, vehicle manufacturing and other industrial structures, and is often used in conjunction with I-beams.The commonly used stainless steel channel materials for stainless steel production are: 201, 202, 301, 304, 321, 316, 316L, and special materials can generally be customized.316L Stainless steel channel details:Product NameStainless steel channelMaterial201,304,316,321,347h,309s,310s904lThickness1.5mm/1.9mm/2.0mm/2.5mm/2.7mm12GA/14GA/16GA/0
Contact Now
Company ProfileSince its establishment Tianjin Xinyuan Stainless Steel Co., Ltd. has been steadily seeking progress with the care and support of colleagues and customers from all walks of life, and has developed into a comprehensive enterprise integrating stainless steel material processing and sales agents.Main materials: 201, 301, 304 (0Cr18Ni9), 304L (00Cr19Ni10), 321 (1Cr18Ni9Ti), 316 (0Cr17Ni12Mo2), 316L (00Cr17Ni14Mo2), 309S (0Cr23Ni13), 310S (0Cr25Ni20), 904L (00Cr20Ni25Mo4.5Gu) 316 , 317L, 317H, 304H, (SUS304, 321, 316, 310S, etc.). Duplex stainless steel (2205, 2507, 2520).
Contact Now
301 Stainless Steel I-Beam widely used in buildings or other metal structures.Product Parameter：Product namestainless steel H-beam / I-beamStandardJIS, AiSi, ASTM, GB, DIN, ENSize100mm-900mmWall thickness1.5mm-28mmMaterial grade301 303 303Cu 304 304J1 304L 316 316L 309S 310S 316Ti 321 430 420 410 409L 904LApplicationHardware products, medical machinery, food machinery, ships, cars, doors and Windows, furniture, large machinery, etcProcessing ServiceBending, Welding, Decoiling, Punching, Cutting, MouldingK
Contact Now
ApplicationThe softened and annealed low carbon alloy 625 is widely used in the chemical process industry.
Contact Now
Alloy A286 features high strength, oxidation resistance, and corrosion resistance at continuously high temperatures. A286 alloys are heat treatable to achieve a wide variety of grain structures and tensile properties. This grade of A286 is annealed and aged. Applications for Alloy A286 include jet engine components, superchargers, turbine wheels and blades, fasteners, springs, and general high-stress components in petrochemical, aerospace, and oil patch industries.DetailsA286 is an iron-nickel-chromium alloy with additions of molybdenum and titanium.
Contact Now
The machinability of grade 202 stainless steel produces long, gummy chips. Machining can also be performed in the annealed condition. For heat treatment, the material has to be soaked at 1038°C (1900°F) for 30 min and cooled below 16°C (60°F) for full martensite transformation. The material can be welded by common fusion and resistance methods; however, this steel should not be joined using oxyacetylene welding method. The recommended filler metal is AWS E/ER630. Forging can be done by pre-soaking for 1 h at 1177°C (2150°F).
Contact Now
