240 Standard 304S 314 410 430 444-manufacture,factory,supplier from China

304 304L Stainless Steel304 is a variation of the basic 18-8 grade, Type 302, with a higher chromium and lower carbon content. Lower carbon minimizes chromium carbide precipitation due to welding and its susceptibility to intergranular corrosion. In many instances, it can be used in the ”as-welded“ condition, while Type 302 must be annealed in order to retain adequate corrosion resistance. Type 304L is an extra low-carbon variation of Type 304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding.

Stainless steel coil: Material: SUS201, 202, 304, 316L, 316Ti, 321, 304L, 441, 444, 436, 439, 430, 409L, 410S, 309S, 310S, 904L, 2205, 2507, etc.  Thickness: 0.3-16.0mm, width 1 meter, 1.22 meters, 1.5 meters, 1.8 meters, 2 meters, non-standard can be customized.   Stainless steel properties:As a widely used steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties;  Stamping, bending and other hot workability, no heat treatment hardening phenomenon (use temperature -196℃~800℃).  Household products (cl

Providing the ultimate in corrosion, rust, stain and temperature resistance, the 410 Stainless Steel  is the most universal screw for almost any application and provides:Stainless steel finish provides a decorative aesthetic and superior corrosion resistanceSuperior holding strengthThe ability to withstand harsh conditionsLong-lasting performanceA reputation for quality, strength and ease of installation from industry professionalsOTHER APPLICATIONSPool enclosures, environmental, coastal construction, water and utilities, boat building, wastewater and sanitation.FAMILYHEAD TYPEANCHOR

430 stainless steel has the following states, the state is not the same, dirty and corrosion resistance is not the same.NO.1, 1D, 2D, 2B, N0.4, HL, BA, Mirror, and various other surface treatment states.1D- The surface is discontinuous and granular, also known as fog surface. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.2D- slightly shiny silvery white. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.2B- Silvery white with better gloss and flatness than 2D surfaces.

410 Stainless Steel Checker Plate410 stainless steel contains 0.15% carbon and 13% chromium. It is a semi martensitic stainless steel. After quenching and tempering, it has high strength and toughness. It has good corrosion resistance and machining performance in a weak corrosive medium with a temperature not exceeding 30 degrees. It also has rust and corrosion resistance in wet atmosphere and fresh water, and has high thermal stability below 700 ℃.

S31803 Plate S31803 Plate  is a standard duplex grade duplex stainless steel alloy. It has the microstructure of equal austenite to ferrite ratio. SA 240 UNS S31803 Sheet is a combination of reliable mechanical stability, ductility and good corrosion resistance properties.

253MA is a heat resistant Austenitic stainless steel designed for applications requiring high creep strength and excellent corrosion resistance.Product Namestainless steel plateThickness0.3~260mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial 200 series: 201/202 300series:301/304/304L/305/309S/310S/316/316L/316LN/316Ti/317/317L/347/347H400 series: 405/409/409L/410/420/430/440C/444/4447 600 series: 630/631 duplex stainless steel: 2205/2507/2520&nbs

430 stainless steel is a type of ferritic stainless-steel that consists of chromium, which gives it its corrosion-resistant properties. the primary alloying element in 430 stainless-steel is chromium, generally starting from 16 to 18 percentage. it additionally has a low carbon content material, which improves its weldability.430 stainless-steel bars are generally utilized in various packages due to their desirable mixture of corrosion resistance, formability, and affordability.

DescriptionProduct Namestainless steel plateThickness0.3~260mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial 200 series: 201/202 300series:301/304/304L/305/309S/310S/316/316L/316LN/316Ti/317/317L/347/347H400 series: 405/409/409L/410/420/430/440C/444/4447 600 series: 630/631 duplex stainless steel: 2205/2507/2520 super stainless steel: 904LFeaturehigh hardness and strength/100% recycled/fire resistant/wter proof/anti corrosion/high tempe

2507 dual-phase steel density: 8.03g/cm3, melting point: 1300-1390 ℃, magnetic: noneHeat treatment: heat preservation between 1000-1052℃ for 1-2 hours, rapid air cooling or water cooling.Mechanical properties: tensile strength: σb≥795Mpa, yield strength σb≥550Mpa: elongation: δ≥15%, hardness ≤310 (HB)Product Parameter：ItemStandardMaterialStainless SteelASTM201, 202, 301, 304, 304L, 304N, XM21, 304LN, 305, 309S, 310S, 316, 316Ti, 316L, 316N, 316LN, 317, 317L, 321, 347, 329,405, 409, 430, 434, 444, 403, 410, 420, 440A, etc.EN1.4372, 1.4373, 1.4319, 1.4301, 1.4306, 1.4315, 1.4303, 1.4833, 1.4845,

Grade 410 belongs to the martensitic family of stainless steel alloys. Its high chromium content, which averages about 11.5 percent of its total composition, gives this stainless steel outstanding resistance to corrosion and excellent durability.

410 stainless Hexale bar: 410 stainless steel is a stainless steel grade produced according to ASTM standard of America, equivalent to 1Cr13 stainless steel of our country, S41000 (American AISI, ASTM).Product Parameter：StandardASTM A479,ASTM A276,ASTM A484, ASTM A582,ASME SA276, ASME SA484, GB/T1220, GB4226, etc.Material301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 310S, 201,202321, 329, 347, 347H 201, 202, 410, 420, 430, S20100, S20200, S30100, S30400, S30403, S30908, S31008, S31600, S31635, etc.SpecificationsRound barDiameter:0.1~500mmAngle barSize: 0.5mm*4mm*4mm~20mm*400mm*400mmFlat bar

254SMO is an austenitic stainless steel.  Because of its high molybdenum content, it has very high resistance to spot corrosion and crevice corrosion. Main ingredients:254 smo carbon (C) 0.02 or less, manganese (Mn) of 1.00 or less, nickel (Ni) 17.5 ~ 18.5, silicon (Si) of 0.8 or less phosphorus (P) of 0.03 or less, sulfur (S) of 0.01 or less, chromium (Cr) 19.5 ~ 20.5, copper (Cu) 0.5 ~ 1.0, molybdenum (Mo) 6.0 ~ 6.5  National standards: UNS S31254, DIN/EN 1.4547, ASTM A280, ASME SA-240  Welding material: ERNiCrMo-3 wire, ENiCrMo-3 electrode Product Name254smo st

Product DescriptionProduct Namestainless steel plateThickness0.3~260mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial 200 series: 201/202 300series:301/304/304L/305/309S/310S/316/316L/316LN/316Ti/317/317L/347/347H400 series: 405/409/409L/410/420/430/440C/444/4447 600 series: 630/631 duplex stainless steel: 2205/2507/2520 super stainless steel: 904LFeaturehigh hardness and strength/100% recycled/fire resistant/wter proof/anti corrosion/high&nb

430 Stainless Steel CoilBy some distance the most famous of all straight-chromium stainless steels, Type 430 is the general-purpose alloy of the ferritic class. Referred to as “17 Chrome stainless,” this grade presents favorable resistance to slight atmospheric corrosion and oxidizing environments. Its resistance to corrosion can be superior and reflectivity accelerated with vivid annealing.Type 430 is acknowledged to have reasonable ductility constrained forming, bending and welding traits and can be drawn to a reasonable degree.

430 stainless steel is used for architectural decoration, fuel burner parts, household appliances, and home appliance parts.  430 is a ferritic stainless steel, and 430 16Cr is a representative steel grade of ferritic steel, with good thermal expansion rate, excellent formability and oxidation resistance.

Product parameters：Grade201/202/301/303/304/304L/316/316L/321/310S/401/409/410/420J1/420J2/430/439/443/444/2205/2507Surface Finish2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ectStandardJIS/SUS/GB/DIN/ASTM/AISI/ENTechniqueCold Rolled; Hot RolledThickness0.3-4mm cold rolled; 3-16mm hot rolled; Customized according to customer requirementsWidth1000mm, 1219mm, 1240mm, 1500mm, 1800mm, 2000mmApplicationInterior/Exterior decoration; Architectur; Evevator; Kitchen; Ceiling; Cabinet; Advertising nameplate; Roof structure;ShipbuildingLead Time7-15 working days after the receipt of 30% depositP

Stainless-steel coil/strip;stainless steel 430 ba coil; stainless steel cold rolled strip;stainless-steel cold rolled coil;stainless steel coil 201/304/430 merchandise description product name:cold rolled stainless-steel coils, cease 2b/ba, mild deep drawing great 1) grade: 201, 304, 410, 430 etc.

ProductStainless Steel Sheet/Plate/CoilSurface FinishBA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, EmbossedTechniqueHot Rolled / Cold RolledStandardGB JIS ASTM ASME ENSteel Grade200 series: 201 202300 series: 301 304 304L 309 310 310s 316 316L 321400 series: 409 410 410S 420 430ColorStandard RAL color:red,bule,white,grey,brick,etc.Stock Dimension0.5mm-4mm x 1220mm/1500mm x 2440mm/2500mm;5mm-25mm x 1220mm/1500mm x 2440mm/2500mm/6000mm;8mm-80mm x 1500/1800/2000mm/2500 x 6000mm;cut to size according to customers' demandsServiceOEM, customized processing service, customized fabrication by drawingsProcessi

We produce and distribute warm rolled and laser fused chrome steel angles throughout the arena in each imperial and metric sizes. Please pick out the catalog on your area beneath to view a list of available standard size angles.

ProductStainless Steel Sheet/Plate/CoilSurface FinishBA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, EmbossedTechniqueHot Rolled / Cold RolledStandardGB JIS ASTM ASME ENSteel Grade200 series: 201 202300 series: 301 304 304L 309 310 310s 316 316L 321400 series: 409 410 410S 420 430ColorStandard RAL color:red,bule,white,grey,brick,etc.Stock Dimension0.5mm-4mm x 1220mm/1500mm x 2440mm/2500mm;5mm-25mm x 1220mm/1500mm x 2440mm/2500mm/6000mm;8mm-80mm x 1500/1800/2000mm/2500 x 6000mm;cut to size according to customers' demandsServiceOEM, customized processing service, customized fabrication by drawingsProcessi

S32750 Welded Pipes are used in offshore platforms, Mechanical and structural components, sea-water piping, Desalination Plants, Heat exchangers and chemical processing industries.Product Parameter：SpecificationSizeOuter Diameter: 6-2500mm (3/8”-100”);Wall Thickness: 1-150mm (SCH10-XXS);Length: As your requestProcessWeldedStandardASTM, DIN, ISO, EN, JIS, GB, etcMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446,600 series: 13-8ph, 15-5ph, 17-4ph, 17

S32760 Super Duplex Forged Bar can be produced by following specification standard ASTM A276.Product Parameter：Stainless Steel barMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446,600 series: 13-8ph, 15-5ph, 17-4ph, 17-7ph(630,631), 660A/B/C/D,Duplex: 2205(UNSS31803/S32205), 2507(UNSS32750), UNSS32760, 2304, LDX2101.

430 stainless steel has oxidation resistance to corrosion, but has a tendency to intergranular corrosion.430 stainless steel wire is widely used in axis.Because it is safe and non-toxic, it is widely used in food tableware.Product Parameter：StandardASTM A479,ASTM A276,ASTM A484, ASTM A582,ASME SA276, ASME SA484, GB/T1220, GB4226, etc.Material301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 310S, 201,202321, 329, 347, 347H 201, 202, 410, 420, 430, S20100, S20200, S30100, S30400, S30403, S30908, S31008, S31600, S31635, etc.SpecificationsRound barDiameter:0.1~500mmAngle barSize: 0.5mm*4mm*4mm~20m