2101 Duplex Stainless Steel Properties-manufacture,factory,supplier from China

LDX 2101* is a duplex (austenitic-ferritic) stainless steel with relatively low contents of alloying elements. The grade has high mechanical strength, similar to that of other duplex grades. Its good corrosion resistance is on par with that of most standard stainless steel grades.

Stainless steel plate is detection and shaping have to be off-line processing.

Through integrated production control, stainless steel foil that is excellent in etching properties and press formability, in addition to ultimately high thickness accuracy, strength, and spring characteristics. Stainless Steel FoilStainless steel foil is produced through the highly accurate rolling of stainless steel to be as thin as 100 mm, thus it has excellent flexibility, lightweight characteristics, and corrosion resistance.

329 is a duplex stainless steel with optimized S and Mo to improve mechanical properties.

Duplex 2304 is two-phase, ferritic, austenitic which contain chromium 23%,nickel 4%, molybdenum-free duplex stainless steel. Itscorrosion resistance properties are similar to 316L stainless steel. Furthemore it has mechanical properties twice to 304L stainless steel/316Lstainless steel grades. And this becomes helpful for the manufacturers to save weight especially for properly designed pressure vessel applications.

S31803 Plate S31803 Plate  is a standard duplex grade duplex stainless steel alloy. It has the microstructure of equal austenite to ferrite ratio. SA 240 UNS S31803 Sheet is a combination of reliable mechanical stability, ductility and good corrosion resistance properties.

Duplex stainless steel tube has good welding performance, compared with ferritic stainless steel and austenitic stainless steel, it is not like the welding heat affected zone of ferritic stainless steel, because of the severe coarsing grain and the plastic toughness is greatly reduced, nor like austenitic stainless steel, is more sensitive to welding hot crack.Because of its special advantages, duplex stainless steel is widely used in petrochemical equipment, seawater and wastewater treatment equipment, oil and gas pipelines, papermaking machinery and other industrial fields.

The main feature is that the yield strength can reach 400-550mpa, which is 2 times of ordinary stainless steel, so it can save material and reduce the cost of equipment manufacturing.

Stainless steel bar specification, materialMaterial :304, 304L, 321, 316, 316L, 310S, 630, 1Cr13, 2Cr13, 3Cr13, 1Cr17Ni2, duplex steel, antibacterial steel and other materials!304(18Cr-8Ni) material: as a widely used steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties; Stamping, bending and other thermal processing, no heat treatment hardening phenomenon (no magnetic, they use temperature -196℃~800℃).

We make use of hundred percent pure raw materials for manufacturing Duplex S31803 Coils that results in the production of high quality of goods. Duplex 31803 Coils has a huge number of applications in various industries. These coils are used in the manufacturing of the piping and tubing in the oils and gas exploration industries and are also used in the manufacturing of food processing equipment.

304 is a universal stainless steel, which is widely used in the manufacture of equipment and parts requiring good comprehensive properties (corrosion resistance and formability). To maintain the corrosion resistance inherent in stainless steel, the steel must contain at least 18% chromium and at least 8% nickel.

Type 301 is a chromium nickel austenitic stainless steel capable of attaining high strengths and ductility by cold working. It is not hardenable by heat ...Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.

The Duplex 2205 Stainless Steel Plate is 3% molybdenum, 22% chromium, 5-6% nickel alloyed stainless steel plate, with high-stress resistance characteristics, high strength, and excellent resistance to impact.Product ShowProducts DescriptionProduct Namestainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial 200 series: 201/202  300 series: 301/304/304L/305/309S/310S/316/316L/316LN/316Ti/317/317L/347/347H 400 series: 405/40

Astm A790 Super Duplex 2507 Stainless Steel PipesProduct DescriptionThe chemical composition is :carbon C≤0.15manganese Mn≤1.25silicon Si≤1.00chromium Cr12.0~14.0nickel Ni≤0.60%phosphorus P≤0.06sulfur S≤0.15Molybdenum≤0.60%Product DescriptionProductAstm A790 Super Duplex 2507 Stainless Steel PipesSurface FinishBA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, EmbossedTechniqueHot Rolled / Cold RolledStandardGB JIS ASTM ASME ENSteel Grade200 series: 201 202300 series: 301 304 304L 309 310 310s 316 316L 321400 series: 409 410 410S 420 430ColorStandard RAL color:red,bule,white,grey,brick,etc.Stock Dimension0.5mm

introduction:Welded stainless steel pipe provides us a large diameter but low cost solution. Our welding process mainly is Plasma-Arc Welding(PAW), its biggest diameter could reach 3000mm. If other process is required, please state it in the requirement of stainless steel tubings.Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface.

Type 301 is an austenitic chromium-nickel stainless steel that is available in the annealed and cold worked conditions. In the annealed condition, Type 301 offers the highest level of stretch formability of any stainless steel and in the heavily cold worked condition offers the highest strength level of any 300 series stainless steel. Type 301 is non-magnetic in the annealed condition but becomes magnetic as a result of cold working.Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.

2304 Duplex Stainless Steel PlateDuplex 2304 is a 23% chromium, 4% nickel, molybdenum-free duplex stainless metal whose shape is a stability of ferritic and austenitic. It has common corrosion resistance comparable or higher than Alloys 304L and 316L however with yield energy almost double that of austenitic stainless steels.

2304 duplex stainless steel bar:Stainless steel is a production which not easy rust, acid resistance and corrosion resistance, so it is widely used in light industry, heavy industry, daily necessities and the decoration industry.

2205 duplex stainless steel Pipe SpecificationItemStainless Steel Tube/PipeSteel grade200series,300 series,400series,duplexStandardASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456,DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216,BS3605,GB13296Material304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201,202,2205,2507,904lSurfacePolishing,annealing,pickling,brightTypehot rolled and cold rolledstainless steel round pipe/tubeSizeWall thickness1mm-150mm(SCH10-XXS)Outer diameter6mm-2500mm (3/8"-100")stainless steel square pipe/tubeSizeWall thickness1mm-150mm(

Super Duplex Steel UNS S32760 Welded Pipes are multi-purpose and possess good weldability, used widely in the offshore and marine industry for their acid corrosion resistance.S32760 Super Duplex Stainless Steel Pipes are highly alloyed with different metals and have a greater mechanical strength.

Duplex 2304 is a 23% chromium, 4% nickel, molybdenum-free duplex stainless steel whose structure is a balance of ferritic and austenitic.

AISI 329 Duplex Stainless Steel Plate belongs to a specification of duplex steel grades.

2205 Duplex Stainless Steel PlateDuplex 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades.

2507 Super Duplex Stainless Steel BarsAlloy 2507 is a duplex stainless steel, a super duplex stainless steel composed of 25% chromium, 4% molybdenum and 7% nickel.Main components: 25Cr-7Ni-4Mo-0.27N2507 is a ferritic-austenitic (duplex) stainless steel, also called duplex stainless steel, which has excellent resistance to pitting, crevice corrosion and uniform corrosion.Application areas: pulp and paper industry, seawater desalination, flue gas purification, heat exchangers, chemical tanker piping systems, seawater systems, etc.Product Parameter：Equivalent MaterialsSAF2507, EN 1.4410, UNS S327